LASERWORLD
Laserworld DS-1000RGB MK5
- 1'000 mW guaranteed power
- Graphics capable - 30 kpps@8°
- Max scan angle 40°
- Full colour mixing - analog modulation
- Extremely sharp intense beams – 4mm beam diameter and low divergence of 0,9 mrad
- Save safety settings direct to the laser and they apply in all modes
- Link multiple units with linking Power, DMX and ILDA
- Free computer control software – Showeditor - upgradable to Showcontroller
- Multiple control modes - Auto, DMX, Art-Net and ILDA
- 1'000 mW guaranteed power
- Graphics capable - 30 kpps@8°
- Max scan angle 40°
- Full colour mixing - analog modulation
Bestens geeignet für
LASERWORLD
Laserworld DS-1000RGB MK5
The Laserworld DS-1000RGB MK5 units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software. They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX, stand-alone mode.
The Laserworld DS-1000RGB MK5 comes with integrated ShowNET network interface and free laser show software (details in the box below)
Beginners as well as professionals use the Laserworld Diode Series units, as they are easy to use, versatile in their features and very compact and lightweight.
The Laserworld DS-1000RGB MK5 comes with 350 mW / 638 nm and uses green diode at 300 mW / 520 nm. The blue diode has 700 mW / 450 nm.
Beam specifications are at great ca. 3 mm / 0.9 mrad full angle and scanning can go as fast as 30 kpps@8°, whereas the scanners can scan a maximum angle of 40°.
With integrated and switchable scan safety.
The whole projector is built with Sealed Housing technology and thus maintenance intervals can be kept very low.
+ Integrated ShowNET incl. free laser show software
The Laserworld DS-1000RGB MK5 features an integrated ShowNET network interface with free laser control software included!
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new Laserworld DS-1000RGB MK5 for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via Art-Net. Custom frames and shows can be played back from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different DMX modes:
(1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
(2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show.
The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.
The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.
The laser can be controlled with a standard DMX controller or DMX software.
One laser sends control commands, the other laser follows these. Works with Stand-Alone modes and Sound-to-Light modes.
The laser can be controlled over LAN - this can be either direct software control, or ArtNET or similar (depending on the main board)
The laser can be controlled over standard ILDA, the analog control signal for laser control. External Digital-Analog-Converters (DACs) can be used.
The laser is equipped with the advanced ShowNET laser mainboard which brings a multitude of features to the laser and makes it an intelligent lighting device.
The full version of the laser show control software Showeditor is included in delivery.
For Dealers and Distribution Partners
See all prices and availability.
Subscribe to newsletter
Stay up to date with the latest news.
Compatible Control
Software Laser Control
ShowNET Internal Control
External ILDA Standard Control
Technical Details
| Guaranteed Power at aperture | 1'000 mW |
| Power Red | 350 mW / 638 nm |
| Power Green | 300 mW / 520 nm |
| Power Blue | 700 mW / 450 nm |
| Beam Specifications | ca. 3 mm / 0.9 mrad |
| Scanner | 30 kpps@8° |
| Max. Scan Angle | 40° |
| Laser Source | Diode |
| Laser Class | 4 |
| Operation Modes | ILDA, DMX, Art-Net, LAN, ILDA streaming, integrated SD card, stand-alone |
| Basic Patterns | over 120 (level, tunnel, grid, waves, etc.) - more can be updated by the user |
| Accessories | power cable, manual, interlock, key, full version Showeditor software license included |
| Power Supply | 85 V - 250 V AC, 50/60 Hz |
| Power Consumption | 40 W |
| Dimensions | 200 x 185 x 125 mm (L x W x H) |
| Weight | 3.8 kg |
| EAN / MPN | 7640144997564 |
| Delivery Scope | power cable, manual, interlock, key, full version Showeditor software license included |
*Due to Advanced Optical Correction technology used in our laser systems the optical power of each colour within installed laser module(s) may slightly differ from the specification of respective laser module(s). Divergence FWHM average depending on model.
Download Technical Datasheet
