ShowNET OEM Set
ShowNET Integration kit for laser manufacturers or custom builders. ShowNET is a full feature laser mainboard
network interface, including mode switch board, ILDA switch board, ethernet connector and Showeditor laser control software full license
Showeditor software license included for free; also compatible to the Showcontroller laser control software as well as others.
network interface, including mode switch board, ILDA switch board, ethernet connector and Showeditor laser control software full license
Showeditor software license included for free; also compatible to the Showcontroller laser control software as well as others.
- Laser DAC for integration
- DMX/ArtNET, Stand-Alone, Sound-to-light (optional), Master-Slave, direct software control
- integrated SD-Card for custom content
- including full Showeditor software license
- future firmware updates with new features and improvements
- ILDA-Streaming capable
ShowNET mainboard as standard:
- Various control options: ILDA, Professional DMX (two modes), Professional Art-Net (two modes), Stand-Alone Operation, Master-Slave, ILDA Streaming Receiver, LAN (Computer control, integrated DAC)
- Create custom content, store it inside the laser and play it back in different modes
- Free laser show control software included
STAND-ALONE MODE:
The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.
The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.
DMX MODE:
The laser can be controlled with a standard DMX controller or DMX software.
The laser can be controlled with a standard DMX controller or DMX software.
ArtNET Control mode
MASTER-SLAVE MODE:
One laser sends control commands, the other laser follows these. Works with Stand-Alone modes and Sound-to-Light modes.
One laser sends control commands, the other laser follows these. Works with Stand-Alone modes and Sound-to-Light modes.
LAN MODE:
The laser can be controlled over LAN - this can be either direct software control, or ArtNET or similar (depending on the main board)
The laser can be controlled over LAN - this can be either direct software control, or ArtNET or similar (depending on the main board)
ILDA MODE:
The laser can be controlled over standard ILDA, the analog control signal for laser control. External Digital-Analog-Converters (DACs) can be used.
The laser can be controlled over standard ILDA, the analog control signal for laser control. External Digital-Analog-Converters (DACs) can be used.
ILDA Streaming
SHOWNET INSIDE:
The laser is equipped with the advanced ShowNET laser mainboard which brings a multitude of features to the laser and makes it an intelligent lighting device.
The laser is equipped with the advanced ShowNET laser mainboard which brings a multitude of features to the laser and makes it an intelligent lighting device.
SHOWEDITOR INCLUDED:
The full version of the laser show control software Showeditor is included in delivery.
The full version of the laser show control software Showeditor is included in delivery.
The ShowNET OEM Set is a special set for the integration of the laser mainboard to laser systems. It is designed for laser manufacturers to easily add multiple features to their devices.
Volume discounts available, starting from 25 units.
- full Showeditor laser show software license included
- fully supported by the Showcontroller laser software
- can be controlled by any professional lighting desk, like GrandMA, Avolites, Chamsys, etc. either via professional DMX or ArtNET
The integration can easily be done by experienced laser technicians. The kit comes with detailed integration instructions. The ShowNET OEM can be powered with 10-25V DC and it usually does not need an additional/separate PSU but can use the same as for the laser sources and/or the scanners.
The ShowNET OEM Set includes an ILDA Switch-board, so the laser can still be used with standard ILDA control signal.
See https://www.laser-interface.com for more details and a feature overview
Volume discounts available, starting from 25 units.
- full Showeditor laser show software license included
- fully supported by the Showcontroller laser software
- can be controlled by any professional lighting desk, like GrandMA, Avolites, Chamsys, etc. either via professional DMX or ArtNET
The integration can easily be done by experienced laser technicians. The kit comes with detailed integration instructions. The ShowNET OEM can be powered with 10-25V DC and it usually does not need an additional/separate PSU but can use the same as for the laser sources and/or the scanners.
The ShowNET OEM Set includes an ILDA Switch-board, so the laser can still be used with standard ILDA control signal.
Some hardware features of ShowNET:
X/Y scanner outputs with 12 bit resolution (4096 different positions on each axis) |
Color outputs with 8 bit resolution (256 different intensity values per color channel): red, green, blue, intensity linked to green |
DMX512 input and output (non-isolated) |
100 Mbit Ethernet port |
Flexible IP address setting: static address, DHCP or AutoIP |
Internal MicroSD card for ILDA file playback (ILDA format code 4/5 RGB), can be accessed via LAN |
Maximum scan speed ~100.000 points per second |
Up to 16 devices can be used in parallel for multiprojector laser shows |
Built-in ArtNet-to-DMX converter |
See https://www.laser-interface.com for more details and a feature overview
> More details
ShowNET Internal Control:
DMX Control
ArtNet Control
Automatic / Stand Alone
Master-Slave
ILDA Streaming
External ILDA Standard Control:
Analog ILDA
> More details
Distributed brands: