Search FAQ & Page

Laser Safety FAQ

How does the interlock work in Laserworld laser displays?

The interlock is a safety option in laser projectors to provide a proper option to connect a safety shut-off button to the laser. The connector used with all Laserworld systems is a D-sub (DE-9) standard connector, with a quite simple pinout: If pin 1 and 2 are linked, the laser output is active. If there is no connection between pin 1 and 2, the output is interrupted.

 

All projectors have a bridging plug for the interlock connector included in delivery. This is necessary to operate the laser if there is no safety shut-off button connected (if you don't want to use a Safety shut off button or if you do a mains shut-off in emergency).You can also connect the interlock to any other switching device, e.g. a light barrier or key switch

Distributed brands:

Distributed Brand LaserworldDistributed Brand tarmdistributed brand Ray Technologies
Distributed Brand Laserworld ShoweditorDistributed Brand Garden StarDistributed Brand SparkBlasterDistributed Brand PangolinDistributed Brand coherentDistributed Brand wireless solutionsDistributed Brand Spider Laser Game

ilda logo black cleanedup 2006 member


Contact us:
ch +41-71-6778080
usa 407-432-7217
en +44-161-8720272

This email address is being protected from spambots. You need JavaScript enabled to view it.
 

You agree to the disclaimer of this page with using it.