Laserworld Logo


Quick Overview

The RTI PIKO RGB 18 is a powerful RGB laser device with a guaranteed output power of 18'000mW



The RTI PIKO devices are very compact laser systems in a sealed housing.

The PIKO RGB 18 has a guaranteed output power of 18'000mW - full color RGB!

Imagine just to take your whole show equipment of e.g. four projectors in your suitcase with you when travelling. This tiny little unit is not only extremely powerful, but it is also completely sealed at IP54!

Standard control of this laser light system is through ILDA and it comes with an advanced main board control via browser interface. It is possible to access the configuration settings for color, scanning and other parameters directly through a browser application by connecting to the laser via LAN (W-LAN with suitable access point). With this browser interface it is no longer necessary to physically access the laser projector (that is probably mounted in several meter height). All configurations can be set remotely from any computer (PC, MAC, Linux), tablet or even mobile phone.
These units can optionally be operated through LAN, DMX, SD-card or auto mode as well. Even W-DMXTM and a detachable remote pad are available on request.

The PIKO RGB 18 is equipped with a green Coherent OPSL Taipan module.

Additional Information

Guaranteed power at aperture: 18'000 mW
Power Red: 2'500 mW / 658 nm | 2'400 mW / 638 nm
Power Green: 8'000 mW / 530 nm
Power Blue: 6'500 mW / 450 nm
Beam Specifications (full angle): ca. 4 mm / <1.0 mrad
Laser Sources: Diode, Coherent Taipan OPSL
Laser Class: 4
Operation Modes: ILDA; optional DMX, Auto, LAN, SD-card, W-DMX
Scanner: CT-6210H (RayScan HP), 60 kpps@8° ILDA, max. 80° (@35 kpps), step response time (2° opt. step): 0.3msec
Scan Angle max.: 80° max.
Accessories: manual, key, power cable, patch cable, optional: detachable remote control pad
Power Supply: 85-250 V AC 50/60 Hz
Power Consumption: 500 W
Dimensions: 250/411/265 mm
Weight: 20 kg