tarm RGB 9 HD

Tarm HD Fl S
Top end high performance laser system, all equipped with Coherent Taipan OPSL HD laser modules with TEM00 beam profile. This laser system is made for top end quality applications like advanced multimedia shows, demanding installation projects and special advanced projections where an extremely low divergence is required.
Quality Made in Germany with cavities made by Coherent!
Incl. waterproof flightcase
  • Full OPSL HD system
  • Extremely low divergence of only 0.3 mrad
  • CT-6210H with LAS Turboscan as standard: Very fast scanning due to small scanner mirrors (ca. 4.5 mm / 0.3 mrad)
  • Great TEM00 beam profile
  • LD optics optionally available for ca. 6.0 mm / <0.25 mrad
  • Integrated powerful mainboard with advanced configuration features (geo-correction, zone setup, color balancing, etc.) and DAC feature
  • Integrated network switch for linking the control signal
  • Control screen for convenient mode selection
  • Incl. waterproof flightcase

ShowNET mainboard as standard:
  • Various control options: ILDA, Professional DMX and ArtNET (two modes), LAN (computer control, integrated DAC), Stand-Alone Operation, ILDA Streaming Receiver, Master-Slave
  • Create custom content, store it inside the laser and play it back in different modes
  • Free laser show control software included
Tarm HD Fl S
Tarm HD F S
Tarm HD Fr S
Tarm Rygb 35 B S
Stand-Alone modeSTAND-ALONE MODE:
The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.
DMX modeDMX MODE:
The laser can be controlled with a standard DMX controller or DMX software.
ArtNET modeArtNET Control mode
Master-Slave modeMASTER-SLAVE MODE:
One laser sends control commands, the other laser follows these. Works with Stand-Alone modes and Sound-to-Light modes.
LAN connectionLAN MODE:
The laser can be controlled over LAN - this can be either direct software control, or ArtNET or similar (depending on the main board)
ILDA connectionILDA MODE:
The laser can be controlled over standard ILDA, the analog control signal for laser control. External Digital-Analog-Converters (DACs) can be used.
ILDA StreamingILDA Streaming
ShowNET insideSHOWNET INSIDE:
The laser is equipped with the advanced ShowNET laser mainboard which brings a multitude of features to the laser and makes it an intelligent lighting device.
Free Showeditor laser software includedSHOWEDITOR INCLUDED:
The full version of the laser show control software Showeditor is included in delivery.
READ MORE PRODUCT DETAILS
The tarm RGB 9 HD show laser projector fulfills highest requirements in terms of brightness, beam divergence and accuracy and offers a guaranteed output power of 9'000 mW. The benefits include:

  • 9'000 mW guaranteed output power
  • a very fast maximum scan speed of CT-6210H with LAS Turboscan: >60kpps @ 8° ILDA for most demanding graphics projections
  • Coherent Taipan OPSL High Definition modules for an extremely low divergence of only 0.3 mrad (full angle) with a low beam diameter of only ca. 4.5 mm
  • increase of brightness compared to conventional OPSL modules and Diode modules
  • beautiful colors and great color fading
  • TEM00 beam profile for a perfectly round beam
  • Integrated network switch, control signal can easily be linked through
  • robust and dustproof housing

 

The laser system is equipped with Coherent Taipan OPSL HD (High Definition) laser modules: 2'500 mW / 639 nm OPSL HD, 5'000 mW / 530 nm OPSL HD, 2'000 mW / 460 nm OPSL HD. Other OPSL setups are also available on request

The tarm RGB 9 HD standard comes with very fast CT-6210H scanners and LAS Turboscan drivers. The scan speed of >60kpps @ 8° ILDA and a maximum scan angle of 70° make the system suitable for any kind of application. Optionally this laser system is also available with LD optics.

This tarm show laser system is equipped with the ultra precise Coherent HD OPSL laser modules with TEM00 beam profile (TEM = Transverse electromagnetic mode) . At TEM00 the brightness of the beam spot is homogenously distributed in a Gaussian curve, so the spot is perfectly round and has no deviances due to wave interferences.
Besides that, the tarm RGB 9 HD has an extremely low beam divergence: with CT-6210H scanners and standard optics: 0.3 mrad or optionally with low divergence (LD) optics: <0.25 mrad (TEM00).

This results in an extremely increase of brightness in comparison to 'conventional' OPSL laser modules and especially in comparison to diode laser sources. The excellent beam specifications make this laser system ideal for graphics and long distance projections, but also for beam effects, which shall be visible from far away.

Due to the dustproof housing, the maintenance effort is very low and the device is also suitable for tough touring applications.

The tarm RGB 9 HD is suitable for indoor and outdoor show laser applications at advanced multimedia shows, demanding installation projects and special advanced projections where an extremely low divergence is required.. Demanding graphics projections are possible without any problems.

INCLUDING SHOWNET LASER MAINBOARD

The tarm RGB 9 HD is delivered with a ShowNET laser mainboard as standard. This means it has a multitude of control features already built-in: Control via DMX or ArtNET, just like a normal lighting fixture, are possible as well as computer control via ILDA or LAN. Of course the laser can be run in stand alone operation, too. The contents for playback (for DMX, ArtNet, Stand-Alone, etc.) can be fully customized. As the ShowNET laser mainboard comes with a full license of the Showeditor software, it is easy to create custom content for the built-in memory or even directly control the laser with a computer - either live or for creation an playback of complete laser shows.

If ILDA shall be used as control option, like from an external Lasergraph DSP, the internal ShowNET mainboard can also be used as receiver for an IDLA streaming signal - so the externbal ILDA signal can be feeded to an external ShowNET device and this sends the direct control to the tarm RGB 9 HD via ILDA Streaming - so no long ILDA cables are required any more, even with ILDA based control systems.
SEE DETAIL PICTURES
TECHNICAL DETAILS
Guaranteed Power at aperture
9'000 mW
Power Red
2'500 mW / 639 nm OPSL HD
Power Green
5'000 mW / 530 nm OPSL HD
Power Blue
2'000 mW / 460 nm OPSL HD
Beam Specifications (full angle)
ca. 4.5 mm / 0.3 mrad
Scanner
CT-6210H with LAS Turboscan: >60kpps @ 8° ILDA
Max. Scan Angle
70°
Laser Source
Coherent Taipan OPSL HD, *TEM00
Laser Class
4
Operation Modes
ILDA, LAN, DMX, ArtNET, ILDA-Streaming, integrated SD card, stand-alone, master-slave; integrated intelligent ShowNET laser mainboard with display
Basic Patterns
over 120 (layers, tunnels, fences, waves, etc.)
Accessories
Incl. waterproof flightcase, browser interface for calibration, power cable, manual; full version Showeditor software license included
Power Supply
85-250 V AC 50/60 Hz
Power Consumption
900 W
Dimensions
371 x 208 x 399 mm
Weight
32 kg
EAN / MPN
7640144996734
 

Distributed brands:

Distributed Brand LaserworldDistributed Brand tarmdistributed brand Ray Technologies
Distributed Brand Laserworld ShoweditorDistributed Brand ShowcontrollerDistributed Brand PangolinDistributed Brand coherent