tarm 3

Tarm 3 Fl S
A high quality, versatile, whitelight RGB laser for professional use. The tarm 3 is perfect for professional laser-shows, graphic projections, installation projects, night clubs but also for rental companies thanks to its robust case and the ShowNet interface, the integrated multi-control mainboard for DMX, ArtNET, computer control, stand-alone operation, etc..
The tarm 3 is delivered including waterproof flight case.
  • 3'000 mW guaranteed power
  • Graphics capable - 45kpps @ 8° ILDA Scanners
  • Full color mixing - analog modulation
  • Extremely sharp intense beams - low divergeance of <0.6 mrad
  • Link multiple units with linking power, interlock, DMX, ILDA
  • Control screen for convenient mode selection
  • Free computer control software - Showeditor - upgradable to Showcontroller
  • Integrated powerful mainboard with advanced configuration features (geo-correction, zone setup, color balancing, etc.) and DAC feature
  • Multiple control modes - stand-alone, DMX, ArtNET, LAN and ILDA
  • Rugged tour grade compact housing
  • incl. waterproof flightcase

ShowNET mainboard as standard:
  • Various control options: ILDA, Professional DMX and ArtNET (two modes), LAN (computer control, integrated DAC), Stand-Alone Operation, ILDA Streaming Receiver, Master-Slave
  • Create custom content, store it inside the laser and play it back in different modes
  • Free laser show control software included
Tarm 3 Fl S
Tarm 3 F S
Tarm 3 Fr S
Tarm 3 Back S Mit SFS
Stand-Alone modeSTAND-ALONE MODE:
The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.
DMX modeDMX MODE:
The laser can be controlled with a standard DMX controller or DMX software.
ArtNET modeArtNET Control mode
Master-Slave modeMASTER-SLAVE MODE:
One laser sends control commands, the other laser follows these. Works with Stand-Alone modes and Sound-to-Light modes.
LAN connectionLAN MODE:
The laser can be controlled over LAN - this can be either direct software control, or ArtNET or similar (depending on the main board)
ILDA connectionILDA MODE:
The laser can be controlled over standard ILDA, the analog control signal for laser control. External Digital-Analog-Converters (DACs) can be used.
ILDA StreamingILDA Streaming
ShowNET insideSHOWNET INSIDE:
The laser is equipped with the advanced ShowNET laser mainboard which brings a multitude of features to the laser and makes it an intelligent lighting device.
Free Showeditor laser software includedSHOWEDITOR INCLUDED:
The full version of the laser show control software Showeditor is included in delivery.
The tarm 3 show laser projector is a full color whitelight RGB laser systems with full analog color modulation and diode-only equipment. The guaranteed output power is specified at 3'000 mW after optics.

The tarm 3 units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX and automatic mode.
The tarm 3 comes with integrated ShowNET network interface and free laser show software. Details in the box below.

The benefits include:

  • 3'000 mW guaranteed output power
  • a very fast maximum scan speed of 45kpps @ 8° ILDA for graphics projection
  • high-precision diode arrays provide an excellent beam divergence of less than <0.6 mrad for a low beam diameter
  • pure diode laser
  • novel method for increasing the beam precision of the single-mode diodes
  • beautiful colors and good color fading
  • the tarm 3 impresses with very bright 637 nm single mode red

 

The tarm 3 laser has great beam specifications with a diameter of ca. ca. 4.5 mm and a beam divergence of less than <0.6 mrad.
It is equipped with a bright red (1'000 mW / 637 nm), a green (900 mW / 520 nm), and a blue (1'700 mW / 450 nm) diode laser source.

The scanners are very fast with 45kpps @ 8° ILDA standard and allow for a maximum scan angle of 50°. Thus they are well graphics capable and suitable for professional laser applications.
Optionally as upgrade available: CT-6210 scanners with 60 kpps@8° ILDA and a max. scan angle of 60°.

This show laser light has a switchable scan safety.

The housing of the tarm 3 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.

The tarm 3 is especially suitable for show laser applications in clubs and bars and can be used by beginners as well as professionals.

+ Integrated ShowNET incl. free laser show software

The tarm 3 features an integrated ShowNET network interface with free laser control software included!
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new tarm 3 for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. Custom frames and shows can be played from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different DMX modes:
(1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
(2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show.
The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.

 

> More details

External ILDA Standard Control:

Ilda Connector
Analog ILDA

Optional control options (modification required!):

Optional control options require modifications to the general laser setup. Other operation modes or compatibilities may get lost.
Pangolin Logo
Quickshow
Pangolin Logo
Beyond

 

> More details

Tarm 2 5 Graphics7 Beam
Tarm 3 Graphics5 Beam
Tarm 2 5 Graphics6 Beam
Tarm 3 Graphics4 Beam
Tarm 2 5 Graphics8 Beam
Tarm 3 Graphics2 Beam
Tarm 3 Graphics6 Beam
Tarm 2 5 Graphics5 Beam
Tarm 3 Graphics3 Beam
Tarm 3 Graphics7 Beam
Tarm 2 5 Graphics1 Beam
Tarm 3 Graphics11 Beam
Tarm 2 5 Graphics4 Beam
Tarm 3 Graphics10 Beam
Tarm 3 Graphics9 Beam
Tarm 2 5 Graphics3 Beam
Tarm 3 Graphics8 Beam
Tarm 3 Graphics1 Beam

 

> More details

Guaranteed Power at aperture
3'000 mW
Power Red
1'000 mW / 637 nm
Power Green
900 mW / 520 nm
Power Blue
1'700 mW / 450 nm
Beam Specifications*
ca. 4.5 mm / <0.6 mrad
Scanner
45kpps @ 8° ILDA; optional: CT-6210 with LAS Turboscan: 60kpps @ 8° ILDA, max. 60°
Max. Scan Angle
50°
Laser Source
Diode
Laser Class
4
Operation Modes
ILDA, DMX, LAN, ArtNet, integrated SD card, stand-alone, master-slave
Basic Patterns
over 120 (layers, tunnels, fences, waves, etc.)
Accessories
Incl. waterproof flightcase, power cable, manual, key, interlock connector, full version Showeditor software license included
Power Supply
85 V - 250 V / AC, 50/60 Hz
Power Consumption
170 W
Dimensions
320 / 260 / 140 mm
Weight
12.5 kg
EAN / MPN
7640144996932
*Due to Advanced Optical Correction technology used in our laser systems the optical power of each colour within installed laser module(s) may slightly differ from the specification of respective laser module(s). Divergence FWHM average depending on model.

 

> More details

 

Distributed brands:

Distributed Brand LaserworldDistributed Brand tarmdistributed brand Ray Technologies
Distributed Brand Laserworld ShoweditorDistributed Brand ShowcontrollerDistributed Brand PangolinDistributed Brand coherent