tarm 12G

Tarm 11G Fl S
The powerful single green tarm 12G is suitable for indoor and outdoor show laser applications at concerts, festivals and other large scale events. It is also perfect for sky laser and landmark laser applications.
Demanding graphics projections or projections over long distances are no problem for this impressive unit due to the extremely good divergence. Green is pretty much the most visible laser color, so a single high power green unit is the most cost effective way to have a highly visible beam.

Including waterproof flightcase
  • 11'000 mW guaranteed power
  • for long distance beams and projections at <0.8 mrad
  • High precision RSL Semiconductor modules for homogenous beam profile and equal divergence of <0.8 mrad on the x and the y axis
  • Complex graphics capable - 45kpps @ 8° ILDA scanners – upgradable to 60kpps
  • Integrated powerful mainboard with advanced configuration features (geo-correction, zone setup, color balancing, etc.) and DAC feature
  • Integrated network switch for linking control signal
  • Control screen for convenient mode selection
  • Rugged tour grade compact housing
  • incl. waterproof flightcase

ShowNET mainboard as standard:
  • Various control options: ILDA, Professional DMX (two modes), Professional Art-Net (two modes), Stand-Alone Operation, Master-Slave, ILDA Streaming Receiver, LAN (Computer control, integrated DAC)
  • Create custom content, store it inside the laser and play it back in different modes
  • Free laser show control software included
Tarm 11G Fl S
Tarm 11G F S
Tarm 11G Fr S
Tarm 11G B S
Stand-Alone modeSTAND-ALONE MODE:
The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.
The laser can be controlled with a standard DMX controller or DMX software.
ArtNET modeArtNET Control mode
Master-Slave modeMASTER-SLAVE MODE:
One laser sends control commands, the other laser follows these. Works with Stand-Alone modes and Sound-to-Light modes.
LAN connectionLAN MODE:
The laser can be controlled over LAN - this can be either direct software control, or ArtNET or similar (depending on the main board)
ILDA connectionILDA MODE:
The laser can be controlled over standard ILDA, the analog control signal for laser control. External Digital-Analog-Converters (DACs) can be used.
ILDA StreamingILDA Streaming
The laser is equipped with the advanced ShowNET laser mainboard which brings a multitude of features to the laser and makes it an intelligent lighting device.
Free Showeditor laser software includedSHOWEDITOR INCLUDED:
The full version of the laser show control software Showeditor is included in delivery.
The tarm 12G show laser system is a top professional single color laser with advanced RSL Semiconductor modules as sources and a guaranteed output power of 11'000 mW.

The tarm 12G units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX / ArtNET, or run in stand-alone mode.
The tarm 12G comes with integrated ShowNET network interface and free laser show software.

  • 11'000 mW guaranteed output power
  • a very fast maximum scan speed of 45kpps @ 8° ILDA for graphics projection
  • high-precision RSL modules provide an excellent beam divergence of <0.8 mrad for a low beam diameter of ca. 5.0 mm
  • great linear fading
  • integrated network switch for linking the control signal
  • the tarm 12G impresses with a very bright 525 nm green with a guaranteed output power of 11'000 mW


The system has great beam specifications with a beam diameter of ca. 5.0 mm and a beam divergence of <0.8 mrad (full angle). It is equipped with green (2x 6'500 mW / 525 nm) RSL Semiconductor modules.

The tarm 12G devices have very fast scanners, running at 45kpps @ 8° ILDA and scanning a maximum scan angle of 50°, upgrades to CT-scanners with 60kpps @ 8° ILDA and a deflection angle of up to 60° are available on request. These specifications definitely make the units perfectly suitable for professional applications and ideal for graphics projections.

The housing of the tarm 12G is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.

The tarm 12G is suitable for demanding show laser applications and graphics projections at festivals, on big stages, for touring and rental purposes. It is also suitable as landmark laser or sky laser.

+ Integrated ShowNET incl. free laser show software

The tarm 12G features an integrated ShowNET network interface with free laser control software included!
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new tarm 12G for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. Custom frames and shows can be played back from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different DMX modes:
(1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
(2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show.
The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.


> More details

External ILDA Standard Control:

Ilda Connector
Analog ILDA

Optional control options (modification required!):

Optional control options require modifications to the general laser setup. Other operation modes or compatibilities may get lost.
Pangolin Logo
Pangolin Logo


> More details

Tarm 11G L S Detail
Tarm 11G R S Detail
Tarm Green Web 001 Beam
Tarm Green Web 00 Beam
Tarm Green Web 008 Beam
Tarm Green Web 006 Beam
Tarm Green Web 004 Beam
Tarm Green Web 005 Beam
Tarm Green Web 007 Beam
Tarm Green Web 002 Beam


> More details

Guaranteed Power at aperture
11'000 mW
Power Green
2x 6'500 mW / 525 nm
Beam Specifications*
ca. 5.0 mm / <0.8 mrad
45kpps @ 8° ILDA; optional: CT-6210H with LAS Turboscan: 60 kpps @ 8° ILDA, max. 60°
Max. Scan Angle
Laser Source
RSL modules
Laser Class
Operation Modes
ILDA, DMX, LAN, ArtNet, integrated SD card, stand-alone, master-slave; integrated intelligent ShowNET laser mainboard with display
Basic Patterns
over 120 (layers, tunnels, fences, waves, etc.)
Incl. waterproof flightcase, power cable, manual, key, interlock connector, full version Showeditor software license included
Power Supply
85 V - 250 V / AC, 50/60 Hz
Power Consumption
340 W
441/260/153 mm
17.5 kg
*Due to Advanced Optical Correction technology used in our laser systems the optical power of each colour within installed laser module(s) may slightly differ from the specification of respective laser module(s). Divergence FWHM average depending on model.


> More details

Distributed brands:

Distributed Brand LaserworldDistributed Brand tarmdistributed brand Ray Technologies
Distributed Brand Laserworld ShoweditorDistributed Brand ShowcontrollerDistributed Brand PangolinDistributed Brand coherent