Laserworld CS-1000RGB

- 1 W RGB laser system
- DMX controllable, master-slave operation possible
- Diode-only laser system
- Computer controllable via ILDA
- Sound-to-light and stand-alone mode
- Front panel laser beam masking plate
- Capable of basic graphics, texts and logos
- Several hundred colors, including white
- 28 [email protected]° scanners
- 360° mounting bracket

The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.

The laser can be controlled with a standard DMX controller or DMX software.

One laser sends control commands, the other laser follows these. Works with Stand-Alone modes and Sound-to-Light modes.

The laser can be controlled over standard ILDA, the analog control signal for laser control. External Digital-Analog-Converters (DACs) can be used.
READ MORE PRODUCT DETAILS
The Laserworld CS-1000RGB show laser projector comes with a completely new designed compact housing, which is light weight and has a stable bracket. The bracket allows for different mounting positions: a hanging as well as a standing installation is possible - ideal for mobile DJs and temporary laser shows, but also for fixed installations at a truss or at the ceiling.
The Laserworld CS-1000RGB is a multi color RGB laser system with a total output power of up to 1'000 mW and a guaranteed output power of 800 mW. The red laser source has an output power of 200 mW / 650 nm, the green 100 mW / 520 nm and the royal-blue laser source has an output power of 540 mW / 445 nm. The laser sources ensure billiant colors and powerful laser beams. The projector has good beam specifications with ca. 3 mm / 1.1 mrad. The galvo system has a scan speed of up to 28 [email protected]°.
Pattern size acan be set by two rotary buttons on the rear side of the housing. The sensitivity of the microphone can be adjusted via the integrated display.
Through DMX, in the automatic mode as well as in the sound-to-light mode about ca. 200 (layers, tunnels, fences, waves, etc.) can be projected in different colors and in various speed. If the automatic mode is active, the pre-programmed patterns run without assistance and in the sound-to-light mode, the laser system projects according to the sound.
Next to the modes mentioned above, this laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX to a main projector (master projector) project the same patterns like the master projector.
The Laserworld CS-1000RGB is computer controllable through a professional ILDA interface. Thus custom or pre-programmed lasershows, logos, texts or own graphics and animations can be shown in combination with a laser control software.
There are safety features like a key switch, an interlock connector and an on-off switch.
The Laserworld CS-1000RGB is ideal for semi-professional applications and is perfectly suitable in bars, medium sized clubs and discos as well as for mobile DJs, private use and in any other party location.
Distributed brands: