Laserworld Logo

Laserworld PL-6000RGB (ShowNET)

Excl. Tax: € 3,000.00 Incl. Tax: € 3,570.00
Find a dealer or apply to become a dealer

availability   Delivery time on request
EAN: 7640144997670

Quick Overview

Powerful RGB laser device of the Laserworld Purelight Series, controllable via all ILDA software or the integrated ShowNET network interface and free laser show software and many features.




Laserworld PL-6000RGB (ShowNET)

Details

The Laserworld PL-6000RGB show laser light is completely equipped with diodes and has a good white balance, with linear color fading behaviour and high visibility.

The Laserworld PL-6000RGB (ShowNET) units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX, automatic and sound-to-light mode.

The Laserworld PL-6000RGB (ShowNET) comes with integrated ShowNET network interface and free laser show software. Details in the box below.

Advantages of the Laserworld PL-6000RGB laser light are:

  • a low-cost yet powerful solution for power demanding laser applications
  • great for large nightclubs and medium sized stages
  • brilliant colors with great linear color fading behavior
  • ideal for long distance beam shows and basic graphics projections

The Laserworld PL-6000RGB has a beam diameter of about 5.0 mm and beam divergence of ca. 1.1 mrad.
Guaranteed output power at aperture is 6'000 mW. 1'500 mW / 638 nm (red), 1'600 mW / 520 nm (green), 3'200 mW / 450 nm (blue).
Fast scanners work at a speed of 35 [email protected]° ILDA and can do a max. scan angle of 50°.

The complete projector is built with Sealed Housing Technology and is cooled through the external cooling fins (bottom part). Thus the maintenance effort is kept very low.
The show laser has an internal PSU for easy handling.
At the back of the unit there are trim pots for color settings, so the color balance can be quickly adjusted. The X- / Y-axis offset can also be set by trim pots. Additionally the Scan Safety can be set at the backside of the laser system.

+ Integrated ShowNET incl. free laser show software

The Laserworld PL-6000RGB (ShowNET) features an integrated ShowNET network interface with free laser control software included!
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new Laserworld PL-6000RGB (ShowNET) for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. You can play custom frames and shows from an integrated SD card (included in delivery) – even in stand-alone and sound-to-light mode!
There are two different DMX modes:
(1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
(2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show.
The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.

Hardware features of integrated ShowNET:

X/Y scanner outputs with 12 bit resolution (4096 different positions on each axis)
Color outputs with 8 bit resolution (256 different intensity values per color channel): red, green, blue, intensity linked to green
DMX512 input and output (non-isolated)
100 Mbit Ethernet port
Flexible IP address setting: static address, DHCP or AutoIP
Internal MicroSD card for ILDA file playback (ILDA format code 4/5 RGB), can be accessed via LAN
standalone operation and DMX IN/OUT via DMX-Adapter
Maximum scan speed ~100.000 points per second
Up to 16 devices can be used in parallel for multiprojector laser shows
Built-in ArtNet-to-DMX converter

Additional Information

Guaranteed power at aperture: 6'000 mW
Power Red: 1'500 mW / 638 nm
Power Green: 1'600 mW / 520 nm
Power Blue: 3'200 mW / 450 nm
Beam Specifications: ca. 5.0 mm / 1.1 mrad
Laser Sources: Diode
Laser Class: 4
Operation Modes: ILDA, DMX, LAN, ArtNet, integrated SD card, stand-alone, sound-to-light
Scanner: 35 [email protected]° ILDA
Scan Angle max.: 50° max.
Accessories: key, power cable, manual
Power Supply: internal PSU
Power Consumption: 190 W
Dimensions: 250 x 240 x 180 mm (L x W x H)
Weight: 10.1 kg

You may also be interested in the following product(s)

Laserworld Purelight Case

Laserworld Purelight Case

Excl. Tax: € 375.00 Incl. Tax: € 446.25