Laserworld Logo

tarm seven

Quick Overview

Pure diode show laser light with a browser interface for configuring the projector over LAN / WiFi.

tarm seven

Details

The tarm seven show laser projector is a pure diode solution with analog color modulation and a guaranteed output power of 6'900 mW.

This show laser light can be controlled via ILDA and come with an advanced main board control via browser interface. It is possible to access the configuration settings for color, scanning and other parameters directly through a browser application by connecting to the laser via LAN (W-LAN with suitable access point). With this browser interface it is no longer necessary to physically access the laser projector (that is probably mounted in several meter height). All configurations can be set remotely from any computer (PC, MAC, Linux), tablet or even mobile phone.

The tarm seven devices have very fast scanners, running at 45kpp@8° ILDA and scanning a maximum scan angle of 50° (@30kpps), upgrades to CT-scanners with 60kpps@8° ILDA and a deflection angle of up to 68° (@ 35kpps) are available on request. These specifications definitely make the units perfectly suitable for professional applications and ideal for graphics projections.

Several units can be addressed at the same time, even the positioning of the devices on a virtual stage is possible. This makes it easy to identify the respective unit to be calibrated.

The projector has good specifications with a beam diameter of ca. 3.5 mm and a beam divergence of only 0.9 mrad (full angle). It is equipped with a red (1'900 mW / 638 nm), a green (1'900 mW / 520 nm), and a blue (3'800 mW / 450 nm) diode laser source.

Advantages of the tarm four devices:

  •     pure diode solution
  •     main board control via browser interface
  •     no physically access to the laser projector needed
  •     fast scanners
  •     wide scan angle
  •     low beam divergence

Additional Information

Guaranteed power at aperture: 6'900 mW
Power Red: 1'900 mW / 638 nm
Number of diodes per array red: 12
Power Green: 1'900 mW / 520 nm
Number of diodes per array green: 2
Power Blue: 3'800 mW / 450 nm
Number of diodes per array blue: 2
Beam Specifications (full angle): ca. 3.5 mm / 0.9 mrad
Laser Sources: Diode
Laser Class: 4
Operation Modes: ILDA
Scanner: 45kpps@8°ILDA; optional as upgrade: CT-6210H incl. Rti RayScan driver: 60kpps@8° ILDA, max. 68° (@35kpps)
Scan Angle max.: 50° (@30 kpps)
Accessories: browser interface for calibration, power cable, manual, key, interlock connector
Power Supply: 85 V - 250 V / AC
Power Consumption: 320 W
Dimensions: 320/260/140 mm
Weight: 12 kg