Laserworld Logo

tarm four

Quick Overview

Pure diode show laser light with a browser interface for configuring the projector over LAN / WiFi.

tarm four


The tarm four show laser projector is a pure diode solution with analog color modulation and a guaranteed output power of 3'600 mW.

This show laser light can be controlled via ILDA and come with an advanced main board control via browser interface. It is possible to access the configuration settings for color, scanning and other parameters directly through a browser application by connecting to the laser via LAN (W-LAN with suitable access point). With this browser interface it is no longer necessary to physically access the laser projector (that is probably mounted in several meter height). All configurations can be set remotely from any computer (PC, MAC, Linux), tablet or even mobile phone.

The tarm four devices have very fast scanners, running at 45kpps@8° ILDA and scanning a maximum scan angle of 60° (@30 kpps), upgrades to CT-scanners with 60kpps@8° ILDA and a deflection angle of up to 80° (@30kpps) are available on request. These specifications definitely make the units perfectly suitable for professional applications and ideal for graphics projections.

Several units can be addressed at the same time, even the positioning of the devices on a virtual stage is possible. This makes it easy to identify the respective unit to be calibrated.

The projector has good specifications with a beam diameter of ca. 3.5 mm and a beam divergence of only 0.8 mrad (full angle).
It is equipped with a red (1'000 mW / 638 nm), a green (1'000 mW / 520 nm), and a blue (2'000 mW / 450 nm) diode laser source.

Advantages of the tarm four devices:

  • pure diode solution
  • main board control via browser interface
  • no physically access to the laser projector needed
  • fast scanners
  • wide scan angle
  • low beam divergence

Additional Information

Guaranteed power at aperture: 3'600 mW
Power Red: 1'000 mW / 638 nm
Power Green: 1'000 mW / 520 nm
Power Blue: 2'000 mW / 450 nm
Beam Specifications (full angle): ca. 3.5 mm / 0.8 mrad
Laser Sources: Diode
Laser Class: 4
Operation Modes: ILDA
Scanner: 45kpps@8°ILDA; as upgrade available CT-scanners with 60kpps@8°, max 80° (@30kpps)
Scan Angle max.: 60° (@30 kpps)
Accessories: power cable, manual, key, interlock connector
Power Supply: 85 V - 250 V / AC
Power Consumption: 200 W
Dimensions: 307/260/139 mm
Weight: 10.5 kg