The RTI ATTO RGB 2.5 is an ultra-compact full color whitelight laser system, with all diode laser sources. With only ca. 20 x 22 x 10cm, the complete laser system is so small that it fits into a hand bag.
The guaranteed power at aperture (after output window) is 2'200mW, the typical power is 2'800mW. Due to the fact that this system is a diode only solution, the beam specifications are excellent – at beam diameter of only about 4mm and a divergence of 0.8mrad (full angle). Together with the extremely fast scanners with 45kpps at 8° this makes the ATTO perfect for a wide variety of applications. Especially the very low divergence let it reach over longer distances. Of course it is equipped with the very bright 638nm red (600mW) and comes with the great visible royal blue at 450nm (1'400mW). As green source special 520nm diodes (480mW) are used. As diode-only solution, the ATTO takes advantage of the linear fading and great color stability of semiconductor laser sources, which is required for many professional applications.
For color balancing and scanner adjustments, the ATTO is equipped with trim pots at the back side of the housing: Three trim pots are specified for color intensity adjustments for red-green-blue, two control the X and Y gain of the scanners and another two trim pots control the X and Y offset of the scanned image.
The RTI ATTO does not need an additional power supply, as it’s already integrated in the system. This makes it extremely handy, especially also for rental companies or for mobile use.
Of course the RTI ATTO complies with the European and U.S. safety standards. It is equipped with a 9-pin SubD standard interlock connector and a safety key switch. The whole system has an advanced scan fail safety for additional laser scan safety.
The RTI ATTO standard comes with ILDA interface for professional computer control. External upgrade devices, like network interfaces or stand-alone-controller, are available on request.
Due to optical beam shaping the output power of the respective laser modules may slightly differ from the values stated below.
|Guaranteed power at aperture:||2'200mW|
|Power Red:||550mW / 638nm|
|Power Green:||480mW / 520nm|
|Power Blue:||1'400mW / 450nm|
|Beam Specifications (full angle):||ca. 4mm / 0.8mrad|
|Laser Sources:||Diode only|
|Operation Modes:||ILDA; optional: DMX, Auto, LAN|
|Scanner:||RayScan, 45kpps@8Â° ILDA; as upgrade available: CT-6210H (RayScan HP), 60kpps@8Â° ILDA, max. 80Â° (@30kpps), step response time (2Â° opt. step): 0.3msec|
|Scan Angle max.:||60Â° max.|
|Accessories:||Manual, power con, key, Interlock connector|
|Power Supply:||85-250V AC 50/60Hz|
|Power Consumption:||120 W|