The Laserworld PRO-1000G is a green laser light system with a total output power of up to 1'000mW. It not only is equipped with fast scanners for great projections, it also comes with bright 520nm green.Therefore the PRO-1000G ensures great visibility and is suitable for beam as well as for graphics projections.
This device provides an analog modulation. It means a better green color regulation. These facts makes the Laserworld PRO-1000G ideal for all applications, needing a analog modulation.
The Laserworld PRO-1000G has an ILDA interface for professional computer control. Thus own or pre-programmed lasershows can be displayed by use of a laser control software, e.g. of Phoenix or Pangolin.
Through DMX preset patterns, like waves, tunnels, circles etc. can be projected at various speed.
The laser system has an automatic mode, which runs the pre-programmed patterns automatically.
If the music mode is active, the laser system projects according to the sound. The microphone sensitivity can easily be adjusted at the rear side of the projector.
Next to the modi mentioned above, this laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX to a main projector (master projector) project the same patterns like the master projector.
The rugged housing of the PRO-1000G is very compact and has dimensions of only 27 x 19 x 16 cm (W/B/H). A special feature of the housing is the mounting bracket that allows to fasten the unit in about 360° turns around the mounting axis of the bracket. This feature makes a fixed installation very easy.
The microphone for the sound-to-light reception and the status LEDs are located at the front panel of the PRO-1000G, next to the laser aperture. In the sound-to-light mode the MIC LED on the front side is flashing when the microphone receives sound triggers. A second LED lights if the laser is in operation mode.
On the rear side of this laser device, a variety of features can be set and different interfaces can be used. In addition to the power connection socket and an on/off switch there are interfaces for DMX in and out, ILDA in and out and for Interlock connection. In case of an active ILDA connection a green LED lights next to the ILDA interface. An integrated key switch prevents the laser system against unauthorized use. The PRO-1000G is equipped with a beam block "Scan Fail Safety", that can be switched on/off on the back panel as well. In active state this prevents the laser from projecting single beams.
Two rotary buttons on the rear side of the device allow adjustement of the pattern size and the sensitivity of the microphone. Furthermore there are dip switches for setting the different operation modes and DMX address. Finally a special loop for a safety cord has been integrated.
The PRO-1000G laser lights are equipped with green diode laser module. The projector has good beam specifications with a beam diameter of about 2mm and beam divergence of about 1.0mrad. At the same time it offers a galvo system with up to 40kpps with a max. scan angle of 40° and a deflection angle for the grating effects of up to 80°.
The Laserworld PRO-1000G is a powerful green laser light system. This device is well suited for private use and professional applications and it is ideal for use in medium to larger sized clubs, discos and nightclubs or in other party locations. It is also a great solution for mobile DJs and rental companies.
|Total Power typical:||1'000mW|
|Guaranteed power at aperture:||800mW|
|Beam Specifications:||ca. 2mm / 1.0mrad|
|Operation Modes:||auto, music, DMX, ILDA|
|Scanner:||Galvo System, max. 40kpps@4Â°|
|Scan Angle max.:||40Â° max|
|Accessories:||power cable, manual, interlock connector, key|
|Power Supply:||85V - 250V AC|