The Laserworld PL-20.000RGB show laser light is completely equipped with diodes and has good beam specifications in combination with precise linear color fading behaviour and high power.
The device can be controlled over ILDA and is graphics capable due to a fast scanning system:
Advantages of the Laserworld PL-20.000RGB laser light are:
- a low-cost yet powerful solution for demanding laser applications
- good divergence (1.3 mrad)
- sharp beams and projections
- a brilliant green with great linear color fading behavior
- no matter if graphics projections, beam shows or professional advertising - the Purelight units work on a high professional level.
The Laserworld PL-20.000RGB has a beam diameter of about 6.5 mm and beam divergence of only 1.3 mrad.
Guaranteed output power at aperture is 20'000mW. 4'000 mW / 638 nm (red), 5'000 mW / 520 nm (green), 12'000 mW / 450 nm (blue).
Fast scanners work at a speed of 30 kpps@8°ILDA and can do a max. scan angle of 60°.
The complete projector is built with Sealed Housing Technology and is cooled through the external cooling fins (bottom part). Thus the maintenance effort is kept very low.
The show laser comes with an internal PSU for easy travelling.
At the back of the unit there are trim pots for color settings, so the color balance can be quickly adjusted. The X- / Y-axis offset can also be set by trim pots. Additionally the Scan Fail Safety can be set at the rear side of the laser system.
|Guaranteed power at aperture:||20'000 mW|
|Power Red:||4'000 mW / 638 nm|
|Power Green:||5'000 mW / 520 nm|
|Power Blue:||12'000 mW / 450 nm|
|Beam Specifications:||ca. 6.5 mm / 1.3 mrad|
|Scan Angle max.:||60Â° max.|
|Accessories:||key, power cable, manual|
|Power Supply:||internal PSU|
|Power Consumption:||350 W|
|Dimensions:||330 x 490 x 210 mm (L x W x H)|
You may also be interested in the following product(s)
Excl. VAT: â‚¬ 329.00 Incl. 8% VAT, excl. shipping: â‚¬ 355.32
Excl. VAT: â‚¬ 65.00 Incl. 8% VAT, excl. shipping: â‚¬ 70.20