RTI PIKO 45 RYGB

The RTI PIKO 45 RYGB is made in Germany and is a powerful show laser system with extremely good visibility that is ideally suited for top professional laser show applications of any kind. It is built with the latest RTI semiconductor laser modules that are specially designed in a way to keep spot size as well as divergence equal on both x- and y-axis. This is significantly advantageous over solutions with a very good divergence on one axis, but a bad divergence on the other. The laser modules inside the RTI PIKO 45 RYGB are different - the spot size and shape is equal for all colors and on both axis!
The color range is extended with a yellow Coherent Taipan OPSL module for increased visibility - and matching spot size.

The beam specifications of the RTI PIKO 45 RYGB are given with only ca. 5.0 mm diameter and <0.7 mrad divergence - which applies to both axis, so it’s an actual value not an average and provides higher quality results than specifications with mixed calculations. The extremely small beam diameter allows for the use of very small mirrors, which results in reduced inertia and thus very good scanning performance.

The RTI PIKO 45 RYGB impresses with a guaranteed RYGB output power of 45'000 mW. Great visibility is achieved with the new RTI Semiconductor Laser Modules (RSL) with special wavelengths for increased visibility: 8'500 mW / 637 nm for a very bright red combined with 15'000 mW / 525 nm green and a strong blue laser module with 24'000 mW / 455 nm. An additional yellow Coherent Taipan OPSL head with 6'000 mW / 577 nm is added for significantly increased visibility - yellow is the best visible color to human eye. The 525 nm green provides a warmer green tone than the 520 nm diodes and also has increased visibility.
These new RSL modules with their extremely low divergence and homogenous beam shape make the RTI PIKO 45 RYGB a top professional laser system. The extremely small beam diameter of only ca. 5.0 mm allows for the use of small scanner mirrors which leads to reduced inertia and higher scan speeds. This is especially important, as the RTI PIKO 45 RYGB can be used for any kind of laser show application: Super sharp beams and vivid colors for large scale concerts and festivals but also a perfectly matched beam for crisp graphics.

The RTI Semiconductor Laser Modules are maintenance free and do not come out of internal alignment.
The standard scanners can be run at a maximum of 45kpps ILDA 8° and a maximum scan angle of 50°. CT-6210 scanners with LAS Turboscan drivers are available as option and provide even higher scan speeds with up to 60 kpps at ILDA 8°.

The housing is built very durable and ideal for use on the road. The new 360° brackets can be safely fixed in the needed position in just a few moments thanks to the quick-lock system. Due to the dustproof housing, the maintenance effort is very low and the device is also suitable for tough touring applications. Control signals can be looped through directly via the network switch, which is also integrated.

The powerful RTI PIKO 45 RYGB is suitable for indoor and outdoor show laser applications at concerts, festivals and other huge events. Demanding graphics projections or projections over long distances are possible without any problems, due to the extremely good divergence.