Laserworld Logo

tarm 11 (ShowNET)

Excl. Tax: £ 10,120.00 Incl. Tax: £ 12,042.80
Find a dealer or apply to become a dealer

availability   Delivery time on request
EAN: 7640144996871

Quick Overview

Pure diode show laser light with a browser interface for configuring the projector over LAN / WiFi. With interface and free laser show software.


tarm 11 (ShowNET)

Details

The tarm 11 show laser projector is a pure diode solution with analog color modulation and a guaranteed output power of 11'000 mW.
The tarm 11 (ShowNET) comes with integrated ShowNET network interface and free laser show software. Details in the box below.

  • 11'000 mW guaranteed output power
  • a very fast maximum scan speed of 45 [email protected]° ILDA for graphics projection
  • high-precision diode arrays provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter
  • pure diode laser
  • novel method for increasing the beam precision of the single-mode diodes
  • beautiful colors and great color fading
  • the tarm 11 impresses with a very bright 638 nm red
  • newly developed electronics with calibration capability via a browser interface
  • MANUFACTURED IN GERMANY, with high precision diodes array modules

 

The projector has good specifications with a beam diameter of ca. 4 mm and a beam divergence of less than 1.0 mrad (full angle). It is equipped with a red (2'800 mW / 638 nm), a green (2'900 mW / 520 nm), and a blue (6'000 mW / 450 nm) diode laser source.

The tarm 11 devices have very fast scanners, running at 45 [email protected]° ILDA and scanning a maximum scan angle of 50° (@30 kpps), upgrades to CT-scanners with 60 [email protected]° ILDA and a deflection angle of up to 60° (@35 kpps) are available on request. These specifications definitely make the units perfectly suitable for professional applications and ideal for graphics projections.

The tarm 11 can be controlled via ILDA and is equipped with a newly developed electronics with calibration capability via a browser interface. In addition, color and scanner settings and other parameters can be configured directly via the browser application by connecting the laser directly via LAN (W-LAN is also possible with a suitable access point). Thanks to the browser interface, it is no longer necessary to operate the laser projector directly on the device (since this is often mounted at a height of several meters). All configurations can be conveniently done via a computer (PC, MAC, Linux), a tablet or a mobile phone.
Several units can be addressed at the same time, even the positioning of the devices on a virtual stage is possible. This makes it easy to identify the respective unit to be calibrated.

The housing of the tarm 11 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.

The tarm 11 is suitable for demanding show laser applications and graphics projections in clubs, bars and on medium-sized stages and can be used by beginners as well as professionals.

+ Integrated ShowNET incl. free laser show software

The tarm 11 features an integrated ShowNET network interface with free laser control software included!
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new tarm 11 (ShowNET) for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. You can play custom frames and shows from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different DMX modes:
(1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
(2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show.
The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.

Hardware features of integrated ShowNET:

X/Y scanner outputs with 12 bit resolution (4096 different positions on each axis)
Color outputs with 8 bit resolution (256 different intensity values per color channel): red, green, blue, intensity linked to green
DMX512 input and output (non-isolated)
100 Mbit Ethernet port
Flexible IP address setting: static address, DHCP or AutoIP
Internal MicroSD card for ILDA file playback (ILDA format code 4/5 RGB), can be accessed via LAN
standalone operation and DMX IN/OUT via DMX-Adapter
Maximum scan speed ~100.000 points per second
Up to 16 devices can be used in parallel for multiprojector laser shows
Built-in ArtNet-to-DMX converter

Additional Information

Guaranteed power at aperture: 11'000 mW
Power Red: 2'800 mW / 638 nm
Number of single red diodes: 16
Power Green: 2'900 mW / 520 nm
Number of single green diodes: 4
Power Blue: 6'000 mW / 450 nm
Number of single blue diodes: 4
Beam Specifications (full angle): ca. 4 mm / <1.0 mrad
Laser Sources: Diode
Laser Class: 4
Operation Modes: ILDA, DMX, LAN, ArtNet, integrated SD card, stand-alone, master-slave
Scanner: 45 kpps ILDA 8°
optional CT-6210H with LAS Turboscan: 60 kpps ILDA 8°; max. 60°.
Scan Angle max.: max. 50°
Accessories: browser interface for calibration, power cable, manual, interlock connector
Power Supply: 85 V - 250 V / AC
Power Consumption: 280 W
Dimensions: 320/260/140 mm
Weight: 14 kg

You may also be interested in the following product(s)

RTI Safety Adapter SUB-D to 3x RJ45

RTI Safety Adapter SUB-D to 3x RJ45

Excl. Tax: £ 62.00 Incl. Tax: £ 73.78