The HB-Laser LC-860 RGB 3 has a maximal output power of 3'200mW and a guaranteed output power of 2'600mW.
This show laser belongs to the LightCube Professional Series, which has been developed for rough mobile use but at the same time the devices of this series are very suitable for fixed installations and most different applications.
This RGB white light show laser is a pure diode device with a very good beam quality, modulation and a linear color fading. Furthermore it is equipped with the fast Apollo ScannerMax scanning system, which enables a scan angle of up to 60° and a scan speed of 45kpps@8°.
The very special thing is that this series has a special shock-absorbing technology to avoid misalignment of the laser during transport or under heavy conditions.
The HB-Laser LC-860 RGB 3 has an active cooling with temperature control. At the same time it is built dust-proof to reduce maintenance requirements to a minimum.
There are trim pots at the rear side for balancing the laser sources per color and adjusting size and position of the scanned image and it comes with a built-in Safety Zone Management System, which can be set at the back panel too.
The HB-Laser LightCube 860 Professional Series was especially designed for super-silent operation to even fit the requirements of theatres, museums, cinemas, planetariums or cruise ships.
|Guaranteed power at aperture:||2'600mW|
|Power Red:||650mW / 638nm|
|Power Green:||800mW / 520nm|
|Power Blue:||1'400mW / 450nm|
|Beam Specifications (full angle):||ca. 3.5mm / 1.0mrad|
|Scanner:||Apollo ScannerMax scanning system; ca. 45kpps@8Â°|
|Scan Angle max.:||60Â°|
|Power Supply:||90 - 240V AC 50/60Hz|
|Dimensions:||370 x 320 x 220 mm (w x d x h)|