Laserworld Logo

Laserworld BeamBar 10RGB

Quick Overview

This BeamBar is a RGB laser solution, equipped with 3 x green DPSS, 4 x red diode and 3 x blue diode with analog modulation, controllable through DMX or runs in stand-alone as well as music mode

Laserworld BeamBar 10RGB

More Views

Details

This special laser effect creates fans of laser beams and can be controlled through DMX or runs in stand-alone or music mode.


The BeamBar 10RGB is a bar with 10 single beam laser outlets. Of which three equipped with a green DPSS laser source 80mW/532nm, four are equipped with a red diode laser source 150mW/650nm and another three are equipped with a blue diode 140mW/470nm.

The advantages of the BeamBar 10RGB are:

  • very bright colors
  • very affordable
  • a very good beam profile

This show laser light provides an analog modulation. It means a better color fading and a much broader color hue. These facts make the Laserworld BeamBar devices ideal for all applications requiring many different color hues and color fadings.

Each laser beam can be individually aligned through a 4-point alignment system, that can easily be accessed from the front - so no opening of the housing is necessary.

The BeamBar 10RGB can be controlled through 13 DMX channels, so each laser source can be controlled individually. Thus it's possible to create many different chaser, beam or fan effects.

Due to the standard DMX compatibility, the BeamBar 10RGB can easily be integrated into an existing lighting setup.

This laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX to a main projector (master projector) project the same patterns like the master projector.

The BeamBar 10RGB is a great effect for stages, live gigs and nightclubs, as well as for TV Shows and show productions.

Additional Information

Total Power typical: 1'350mW
Guaranteed power: 1'200mW
Power Red: 4 x 150mW / 650nm
Power Green: 3 x 80mW / 532nm
Power Blue: 3 x 140mW / 470nm
Beam Specifications: ca. 3mm / <1.5mrad
Laser Sources: Diode, DPSS
Laser Class: 3B
Operation Modes: DMX, stand-alone, sound-to-light, master-slave
Accessories: Interlock connector, manual, key
Power Supply: 100V - 250V AC 50/60Hz
Power Consumption: 50W
Dimensions: 1000 x 160 x 85 mm (l x w x h)
Weight: 9.0 kg

This Product Series In Use - References