tarm 6 OUTDOOR
IP65 waterproof laser system, suitable for outdoor use and fixed installations.
- IP65 waterproof housing
- 6'000 mW guaranteed power
- Graphics capable - 45 kpps@8° ILDA Scanners
- Full color mixing - analog modulation
- Extremely sharp intense beams - low divergeance of <0.6 mrad
- Control screen (internal) for convenient mode selection
- Free computer control software - Showeditor - upgradable to Showcontroller
- Integrated powerful mainboard with advanced configuration features (geo-correction, zone setup, color balancing, etc.) and DAC feature
- Multiple control modes - stand-alone, ArtNET, LAN and ILDA streaming
Carte mère ShowNET par défaut :
- Diverses options de contrôle : Art-Net professionnel (deux modes), Fonctionnement autonome, Récepteur de flux ILDA, LAN (contrôle par ordinateur, DAC intégré)
- Créer du contenu personnalisé, le stocker à l'intérieur du laser et l'afficher dans différents modes
- Logiciel de contrôle Show Laser gratuit inclus
MODE AUTONOME:Le laser fonctionne de manière autonome et n'a pas besoin d'être contrôlé séparément. Il lit le contenu stocké sur la carte mère du laser.
Mode de contrôle ArtNET
MODE LAN:Le laser peut être contrôlé via réseau / LAN - il peut s'agir soit d'un contrôle logiciel direct, soit d'ArtNET ou d'un système similaire (selon la carte mère)
Streaming ILDA
SHOWNET INSIDE:<Le laser est équipé de la carte mère laser avancée ShowNET qui apporte une multitude de fonctionnalités au laser et en fait un dispositif d'éclairage intelligent.
SHOWEDITOR INCLUS:<La version complète du logiciel de contrôle laser Showeditor est incluse avec la carte mère ShowNET.
PANGOLIN FB4:<Commandez votre laser standard équipé du DAC Pangolin FB4. La FB4 remplace la carte mère ShowNET, les fonctionnalités sont donc limitées à celles de la FB4.
Avec la FB4 intégrée, le laser peut être directement contrôlé par le logiciel Pangolin.
Upgrade scanners CT-6210H:Upgrade des performances du scanner avec les puissants scanners CT-6210H avec l'électronique de gestion Turboscan Laseranimation.
To cope with varying temperatures, the tarm OUTDOOR units are equipped with an active watercooling system, that is built into the housing. An active heating system helps to keep the laser systems operational even at low temperatures. Thus the tarm 6 OUTDOOR lasers can be used at environmental temperatures between -10°C and +45°C. A CT Scanner upgrade with LAS Turboscan drivers is available for the tarm 6 OUTDOOR to achieve top end quality graphics results.
The tarm 6 OUTDOOR show laser projector is a full color whitelight RGB laser systems with full analog color modulation and diode-only equipment. The guaranteed output power is specified at 6'000 mW after optics.
The tarm 6 OUTDOOR units have a built-in network DAC for Showcontroller, Showeditor, Touchdesigner, MadLaser, etc., but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3) and ILDA streaming. They also have a built-in memory with pre-set patterns, that can be easily triggered through ArtNet and automatic mode.
The tarm 6 OUTDOOR comes with integrated ShowNET network interface and free laser show software. Details in the box below.
The benefits include:
- 6'000 mW guaranteed output power
- a very fast maximum scan speed of 45 kpps@8° ILDA for graphics projection
- high-precision diode arrays provide an excellent beam divergence of less than <0.6 mrad for a low beam diameter
- pure diode laser
- novel method for increasing the beam precision of the diodes
- beautiful colors and good color fading
- the tarm 6 OUTDOOR impresses with very bright 637 nm red diodes
Â
The tarm 6 OUTDOOR laser has great beam specifications with a diameter of ca. ca. 4.5 mm and a beam divergence of less than <0.6 mrad.
It is equipped with a bright red (2'000 mW / 637 nm), a green (2'000 mW / 520 nm), and a blue (2'500 mW / 450 nm) diode laser source.
The scanners are very fast with 45 kpps@8° ILDA standard and allow for a maximum scan angle of 50°. Thus they are well graphics capable and suitable for professional laser applications.
Optionally as upgrade available: CT-6210 scanners with 60 kpps@8° ILDA and a max. scan angle of 60°.
+ Integrated ShowNET incl. free laser show software
The tarm 6 OUTDOOR features an integrated ShowNET network interface with free laser control software included!
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new tarm 6 OUTDOOR for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. It is also possible to trigger single frames via ArtNet. Custom frames and shows can be played from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different ArtNet modes:
(1) DJ Mode with the most used features for beginners. Only a few channels are used for a quick and easy access to the most important adjustments directly at the laser system.
(2) Professional Mode with all ArtNet features especially for users with an ArtNet capable console. All adjustments can be triggered and allow for full control of the professional laser show.
The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.
> Plus d'informations
Télécharger la fiche technique
Marques Distribuées: