tarm 12

Tarm 12 Fl S
A high power robust professional laser with built-in multi-control mainboard for DMX, ArtNET, LAN, ILDA, ILDA streaming, stand-alone operation, etc..
High power red for great white balance
Perfect for professional shows, rental companies, installation projects, festivals, big stages, projection mapping and graphics installs.
  • 11'300 mW guaranteed power
  • Complex graphics capable - 45 [email protected]° ILDA scanners – upgradable to 60kpps
  • Extremely sharp intense beams - low divergence of <0.9 mrad
  • Integrated powerful mainboard with advanced configuration features (geo-correction, zone setup, color balancing, etc.) and DAC feature
  • Integrated network switch for linking the control signal
  • Control screen for convenient mode selection
  • Rugged tour-grade compact housing
  • Laser Artists' choice
  • Lighting Designers' choice

ShowNET mainboard as standard:
  • Various control options: ILDA, Professional DMX and ArtNET (two modes), LAN (computer control, integrated DAC), Stand-Alone Operation, ILDA Streaming Receiver, Master-Slave
  • Create custom content, store it inside the laser and play it back in different modes
  • Free laser show control software included
Tarm 12 Fl S
Tarm 12 F S
Tarm 12 Fr S
Tarm 12 Back S
Stand-Alone modeSTAND-ALONE MODE:
The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.
DMX modeDMX MODE:
The laser can be controlled with a standard DMX controller or DMX software.
ArtNET modeArtNET Control mode
Master-Slave modeMASTER-SLAVE MODE:
One laser sends control commands, the other laser follows these. Works with Stand-Alone modes and Sound-to-Light modes.
LAN connectionLAN MODE:
The laser can be controlled over LAN - this can be either direct software control, or ArtNET or similar (depending on the main board)
ILDA connectionILDA MODE:
The laser can be controlled over standard ILDA, the analog control signal for laser control. External Digital-Analog-Converters (DACs) can be used.
ILDA StreamingILDA Streaming
ShowNET insideSHOWNET INSIDE:
The laser is equipped with the advanced ShowNET laser mainboard which brings a multitude of features to the laser and makes it an intelligent lighting device.
Free Showeditor laser software includedSHOWEDITOR INCLUDED:
The full version of the laser show control software Showeditor is included in delivery.
READ MORE PRODUCT DETAILS
The tarm 12 show laser projector is a pure diode solution with analog color modulation and a guaranteed output power of 11'300 mW.

The tarm 12 units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX, automatic mode.
The tarm 12 comes with integrated ShowNET network interface and free laser show software.

  • 11'300 mW guaranteed output power
  • a very fast maximum scan speed of 45 [email protected]° ILDA for graphics projection
  • high-precision diode arrays provide an excellent beam divergence of <0.9 mrad for a low beam diameter
  • Integrated network switch for linking the control signal
  • novel method for increasing the power density of the red laser beam
  • beautiful colors and great color fading
  • the tarm 12 impresses with a very bright 3'600 mW / 637 nm red for an improved white balance
  • Trim pots for adjusting color intensity
  • MANUFACTURED IN GERMANY, with high precision diodes array modules

 

The projector has good specifications with a beam diameter of ca. 4.5 mm and a beam divergence of <0.9 mrad (full angle). It is equipped with a red (3'600 mW / 637 nm), a green (2'900 mW / 520 nm), and a blue (5'500 mW / 450 nm) diode laser source.

The tarm 12 devices have very fast scanners, running at 45 [email protected]° ILDA and scanning a maximum scan angle of 50°, upgrades to CT-scanners with 60 [email protected]° ILDA and a deflection angle of up to 60° are available on request. These specifications definitely make the units perfectly suitable for professional applications and ideal for graphics projections.


The housing of the tarm 12 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.

The tarm 12 is suitable for demanding show laser applications and graphics projections in clubs, bars and on medium-sized stages and can be used by beginners as well as professionals.

+ Integrated ShowNET incl. free laser show software

The tarm 12 features an integrated ShowNET network interface with free laser control software included!
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new tarm 12 for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. Custom frames and shows can be played back from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different DMX modes:
(1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
(2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show.
The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.

SEE DETAIL PICTURES
Tarm Five Eleven 2 Beam
Tarm Five Eleven 4 Beam
Tarm Five Eleven 6 Beam
Tarm Series Tarm Four Seven Graphics Beam
Tarm Five Eleven 1 Beam
Tarm Five Eleven 5 Beam
Tarm Five Eleven 7 Beam
Tarm Five Eleven 3 Beam
TECHNICAL DETAILS
Guaranteed Power at aperture
11'300 mW
Power Red
3'600 mW / 637 nm
Power Green
2'900 mW / 520 nm
Power Blue
5'500 mW / 450 nm
Beam Specifications (full angle)
ca. 4.5 mm / <0.9 mrad
Scanner
45 [email protected]° ILDA; optional CT-6210H with LAS Turboscan: 60 [email protected]° ILDA, max. 60°
Max. Scan Angle
50°
Laser Source
RSL module, Diode
Laser Class
4
Operation Modes
ILDA, DMX, LAN, ArtNet, integrated SD card, stand-alone, master-slave; integrated intelligent ShowNET laser mainboard with display
Accessories
transport case, power cable, manual, key, interlock connector, full version Showeditor software license included
Power Supply
85 V - 250 V / AC
Power Consumption
280 W
Dimensions
320/260/140 mm
Weight
12.5 kg
EAN / MPN
7640144996956
 

Distributed brands:

Distributed Brand LaserworldDistributed Brand tarmdistributed brand Ray Technologies
Distributed Brand Laserworld ShoweditorDistributed Brand ShowcontrollerDistributed Brand PangolinDistributed Brand coherent