Downloads

Downloads

Downloads, Manuals

Download details

RTI Manual NANO Tripan Series 2014 RTI Manual NANO Tripan Series 2014

e-max.it: your social media marketing partner
Information
Version2014
Size739.77 KB
MD5 Checksum0928f9fb8b472d0c75ba5969bf385ecd
Mirrors:

Text in this document

Laserworld Ads:
Find more products:
Manual / Bedienungsanleitung RTI Nano Tripan Please spend a few minutes to read this manual fully before operating this laser! Bitte lesen Sie diese Bedienungsanleitung sorgfältig vor Inbetriebnahme dieses Showlasersystems! rev. 03/2014 Deutsch Manual: RTI Nano Tripan Series Rechtlicher Hinweis: Die Firma Laserworld AG behält sich das Recht vor, Änderungen an ihren Produkten vorzunehmen, die der technischen Weiter entwicklung dienen. Diese Änderungen wer den nicht notwendigerweise in jedem Einzel fall dokumentiert. Diese Betriebsanleitung und die darin ent haltenen Informationen wurden mit der ge botenen Sorgfalt zusammengestellt. Die Fir ma Laserworld AG übernimmt jedoch keine Gewähr für Druckfehler, andere Fehler oder daraus entstehende Schäden. Die in dieser Bedienungsanleitung genann ten Marken und Produktnamen sind Waren zeichen oder eingetragene Warenzeichen der jeweiligen Titelhalter. Legal notice: Thank you for purchasing this Laserworld product. Due to continual product develop ments and technical improvements, Laser world (Switzerland) AG reserves the right to make modications to its products. This manual and its content have been made with due care but Laserworld (Switzerland) AG cannot however, take any responsibility for any errors, omissions or any resulting damages forthwith. The brands and product names mentioned in this manual are trade marks or registered trade marks of their respective owners. Manual: RTI Nano Tripan Series Content: Product and package contents Preliminary warning notices Steps for setup, safety instructions Safety instructions for work on the device Service notes Warnings and other notices on the device Device connections Operation Remote Control Pad Cleaning Final statement Technical data sheet Laser specications Manual: RTI Nano Tripan Series 1. Product and package contents Please check if all listed parts are included and undamaged. Included in delivery: 1 x laser projector 1 x key for (key-) switch 1 x power cable 1 x patch cable 1 x detachable remote pad 3. Initial operations, safety instructions Make sure to use correct voltage ; see in formation on device & in this manual. Make sure that the device is not connec ted to mains during installation. Installation has to be done by technical experienced and qualied persons cording to safety regulations of the res pective country. Always ensure that maximum permis sible exposure (MPE) is not exceeded in areas accessible to the public or members of sta. In some countries an additional ins pection by technical control institutes could be necessary. The power supply should be easily acces sible. When installing the laser mount it with a minimum distance of 15 cm from walls and objects. For safe setup e.g. on walls or ceilings safety cord. The safety cord should be able to withstand tenfold the weight of the device. Please follow the accident prevention regulations of pro fessional associations and/or comparable regulations for accident prevention. If the device has been exposed to great temperature changes , do not switch it on immediately. Never use dimmer, RC or other electroni cally switched sockets. Whenever possib le, do not use the laser projector together with large appliances (especially fog ma 2. Preliminary warning notices Please use this device only according to these operating instructions Do not use the device if there are any on housing, connector panels, power supplies or power cords. Never look directly into the light source of a laser projector. Danger of damage to the eyes or even blindness in extreme circumstances! Any warranty claims are void if the warranty label is removed or tampered with in any way. Manual: RTI Nano Tripan Series Ensure sucient ventilation place the device on any warm or heat ra diating surface. Especially the ventilati on openings must not be covered Ensure that device does not get over heated. Make sure that the device is not exposed to spotlights (especially moving heads). Heat of spotlights could overheat laser in a little while and leads to a degra dation of performance. 4. Working on the device This product has no user serviceable parts inside and should only be maintained and serviced by a qualied engineer. Be sure that the mains plug is not connected to the power supply while installing the device. Take o all reecting things like rings, watches etc. befo re starting to work with or at the projector. Only use non-reecting tools to work on device. Wear protective clothing (like goggles, gloves etc.) according to laser power and wave length of the laser. 5. Service notes Moisture and heat can reduce lifetime of the laser system dramatically and expires any warranty claim. Quick on/o switching of this device will reduce durability of the laser diode dra matically. Avoid sharp knocks and shocks to this device and ensure sucient protection during tr...


Distributed brands:

logo-laserworldlogo-swisslasHB-Laserlogo-ray-technologies-rti
logo tarm
logo-pangolinlogo-coherentlogo-wireless-solutionsint visionsSpider-Laser-Game

logo-vplt-foerderndes-mitgliedilda logo black cleanedup 2006 member


Contact us:
ch +41-71-6778080
en +44-161-8188969

 

You agree to the disclaimer of this page with using it.