Laserworld Proline Series
Read carefully before using this device!
Please check if all listed parts are included, and are not damaged. Included:
1 x Laser projector
1 x Power cable
1 x 9
2 x key
1 x sa
1 x manual
If the device has been exposed to great temperature changes, do not switch it on immediately. Condensation
water may damage your device. Leave the device switched off until it has reached room temperature.
must only be used for shows. Any operation has to be attended and supervised by a skilled and well
Never leave this device running unattended and keep it away from children and unauthorized persons.
Keep away from heaters and other hea
t sources. In order to safeguard sufficient ventilation, leave 50 cm of free
space around the device.
Never direct the laser beam to people or animals.
CAUTION LASER DIODE: If you open the device for cleaning, always disconnect from mains!
HEALTH HAZARD! N
ever look directly into the light source, as sensitive persons may suffer an
These lasers are considered a definite eye hazard, particularly at the higher power levels, which WILL cause eye
damage. So these laser series models supplied wit
h a key switch to prevent unauthorized use, warning labels and
aperture labels affixed to the laser.
Prior to installation and operation of the laser, the paths of the beams and effects should be considered,
particularly with respect to
how they will reach the audience. If direct audience scanning is desired, then the laser
energy in the effects needs to be considered to decide if the effects are safe for direct viewing. Always ensure, that
maximum permissible exposure (MPE) is not e
xceeded in the area accesible to the public. So install the laser in
such a way, that minimum distances and heights ensure the MPE is never exceeded in the public area.
When setting up the laser, make sure the laser is affixed firmly, to avoid vibrations.
Warning labels on the device
Operation by qualified
To the beam
Laser class 4
Never direct laser
Beam at people
Caution of radiation
Never look directly
If cover is removed
Indoor use only
At front opening:
laser radiation is emmited.
OPERATING THE LASER
removal voids warranty
The operator has to make sure that laser radiation
for laser class 4 also reflec
ted laser radiation
the maximum permissible level is avoided by technical or organisational measures. (Especially with respect to the
MPE, see above.)
Make sure to use the correct voltage. Use a power socket with earth/ground.
especially fog machines, on the same mains!
If the device is used in a flying installation, the mounting brackets and an appropriate saf
rope must be afixed.
In some countries, the operator must notify the accidence insurance and the authority for industrial safety, before
operating a laser. For more information, contact the relevant authorities.
Please consider that unauthorized modifi
cations on the device are strictly forbidden due t...