Downloads, Manuals

Download details

Laserworld Manual Club Series CS-2000RGB NET 2013 Laserworld Manual Club Series CS-2000RGB NET 2013

Size707.99 KB
MD5 Checksumc57f4b302851f7bce92e63aaf86e1df5

Text in this document

Laserworld Ads:
Find more products:
Manual / BedienungsanleitungClub SeriesCS-2000RGB NET Please read this manual carefully prior to product operation! Bitte lesen Sie diese Bedienungsanleitung vor Inbetriebnahme des Produkts! Deutsch Manual: Club Series CS-2000RGB NET Rechtlicher Hinweis: Die Firma Laserworld (Switzerland) AG behält sich das Recht vor, Änderungen an ihren Pro dukten vorzunehmen, die der technischen Weiterentwicklung dienen. Diese Änderun gen werden nicht notwendigerweise in je dem Einzelfall dokumentiert. Diese Betriebsanleitung und die darin enthal tenen Informationen wurden mit der gebote nen Sorgfalt zusammengestellt. Die Firma La serworld (Switzerland) AG übernimmt jedoch keine Gewähr für Druckfehler, andere Fehler oder daraus entstehende Schäden. Die in dieser Bedienungsanleitung genann ten Marken und Produktnamen sind Waren zeichen oder eingetragene Warenzeichen der jeweiligen Titelhalter. Legal notice: Laserworld (Switzerland) AG reserves the right to make modications to its products, attending to further technical developments. These modications do not necessarily have to be recorded in each case. This manual and its information have been made with due care. Laserworld (Switzerland) AG cannot, however, take any responsibility for errata, bugs, or the resulting damages. The brands and product names mentioned in this manual are trade marks or registered trade marks of their respective owners. Manual: Club Series CS-2000RGB NET Content: Scope of delivery & details Preliminary warning notices Initial operations, safety instructions Working on the device Service notes Warnings and other notices on the device Device connections Operation Final statement Technical data sheet Laser specications Manual: Club Series CS-2000RGB NET 1. Scope of delivery & details Please check if all listed parts are included and undamaged. Included in delivery: 1 x laser projector 1 x Interlock adapter 1 x power cable 2 x key (for key switch) 1 x Micro SD Card 3. Initial operations, safety instructions Make sure to use correct voltage ; see in formation on device & in this manual. Make sure that the device is not connec ted to mains during installation. Installation has to be done by technical experienced and qualied persons cording to safety regulations of the res pective country. Always ensure that maximum permissib le exposure (MPE) is not exceeded in are as accessible to the public. In some countries an additional ins pection by technical control institutes could be necessary. Connect an easily accessible inter lock connector or circuit breaker to the projector. The power supply should be easily acces sible. When installing the laser mount it at a mi nimum distance of 15 cm from walls and objects. For safe setup e.g. on walls or ceilings safety cord. The safety cord should be able to withstand tenfold the weight of the device. Please follow the accident prevention regulations of pro fessional associations and/or comparable regulations for accident prevention. If the device has been exposed to great temperature changes , do not switch it on immediately. Condensation water may damage device. 2. Preliminary warning notices Please use this device only according to these operating instructions Do not use the device if there are any at housing, connector panels, power supplies or power cable. Never look directly into the light source of a laser projector. Danger of blindness! Do not operate the device at high humidity, in the rain or in dusty environments. Protect device against dripping or splashing water. Do not place any liquid lled containers at the device. Warranty claim expires with removal of warranty label. Manual: Club Series CS-2000RGB NET Never use dimmer, RC or other electroni cally switched sockets. Whenever possib le, do not use the laser projector together with large appliances (especially fog ma Ensure sucient ventilation place the device on any warm or heat ra diating surface. Especially the ventilati on openings must not be covered Ensure that device does not get over heated. Make sure that the device is not exposed to spotlights (especially moving heads). Heat of spotlights could overheat laser in a little while and leads to a degra dation of performance. 4. Working on the device Be sure that the mains plug is not connected to the power sup ply while installing or opening the device (e.g. for cleaning). Take o all reecting things like rings, watches etc. before starting to work with or at the projector. Only use non-reecting tools to work on device. Wear protective clothing (like goggles, gloves etc.) accor ding to laser power and wavelength of the laser. 5. Service notes Moisture and heat can reduce lifetime of the laser system dramatically and expires any warranty claim. Quick on/o switching of device can re duce durability of laser diodes dramati cally. Avoid concussions during transport....

Distributed brands:

logo tarm
logo-pangolinlogo-coherentlogo-wireless-solutionsint visionsSpider-Laser-Game

logo-vplt-foerderndes-mitgliedilda logo black cleanedup 2006 member

Contact us:
ch +41-71-6778080
en +44-161-8188969


You agree to the disclaimer of this page with using it.