Read carefully before using this device!
Bitte lesen Sie diese Bedienungsanleitung, bevor Sie das Gerไt in Betrieb nehmen!
Das Inhaltsverzeichnis ist leer, da keiner der Absatzstile, die in den Informationen
์โๅไธๅ ๅไ ๅๅ๋ฬไๅ ๅไจไ ๅจๆฐไฌไผๅฬๅไฐๅไเผฬไฐๅฬโๅไธๅ ๅไ
nt verwendet wird.
Please make sure the following parts are included:
1 x Laser projector
1 x Remote lock connector
1 x key
1 x Power cable
1 x User manual
If the device has been exposed to great temperature changes, do
not switch it on immediately. Condensation water may damage
your device. Leave the device switched off until it has reached
The laser must only be used for shows. Any operation has to be attended and supervised by a skilled and
Never leave this device running unattended and keep it away from children and unauthorized persons.
Keep away from heaters and other heat sources. In order to safeguard sufficient ventilation, leave 50 cm of
free space around the device.
ver direct the laser beam to people or animals.
CAUTION LASER DIODE: If you open the device for cleaning, always disconnect from mains!
HEALTH HAZARD! Never look directly into the light source, as sensitive persons may suffer an
rs are considered a definite eye hazard, particularly at the higher power levels, which WILL
cause eye damage. So these laser series models supplied with a key switch to prevent unauthorized use,
warning labels and aperture labels affixed to the laser.
Prior to installation and operation of the laser, the paths of the beams and effects should be considered,
particularly with respect to how they will reach the audience. If direct audience scanning is desired, then
the laser energy in the
effects needs to be considered to decide if the effects are safe for direct viewing.
Always ensure, that the
maximum permissible exposure (MPE) is not exceeded in the area accesible to
public. So install the laser in such a way, that minimum distance
s and heights ensure the MPE is never
exceeded in the public area. When audience scanning is performed, a
n operator has to be present. An
easily accessible emergency switch has to be installed.
When setting up the laser, make sure the laser is
ly, to avoid vibrations.
Warning labels on the device
Operation by qualified
To the beam
Laser class 3b
Never direct laser
Beam at people
Caution of radiation
Never look directly
over is removed
Indoor use only
At front opening:
laser radiation is emitted.
โๅๅ๋ๅฬๅไ ๅๅๅคไ ฬๅไฌไ ฬๅจไๅๅไๅๅๅฐแๅไ ๅไฐไไผฬๅๅ ๅไไ ๅฬไผไไไ ไผฬ
removal voids warranty
The operator has to make sure that laser radiation
r laser class 4 also reflected laser radiation
than the maximum permissible level is avoided by technical or organisational measures. (Especially with
respect to the MPE, see above.)
Make sure to use the correct voltage. Use a power socket with ea
โๅๅ๋ๅฬๅ ๅไ ฬไไฐๅๅไ ๅเผฬใโเผ
ๅๅไไธไ ๅๅแฬใจไฌไ ๅไ ๅคไ ๅฬๅๅๅๅไฐไไผไ เผฬไๅๅ๋ๅฬๅ ๅไ ฬๅไฌไ ฬไผไๅไ ๅฬๅๅไจไ ๅไฌไ ๅฬ...