Downloads, Manuals

Download details

Laserworld Manual Ecoline Series EL-100RG, EL-150GB, EL-200RB Micro 2013 Laserworld Manual Ecoline Series EL-100RG, EL-150GB, EL-200RB Micro 2013

Size588.66 KB
MD5 Checksum56f3fbe962f7b6fc5356c9f33cba167e

Text in this document

Laserworld Ads:
Find more products:
Manual / BedienungsanleitungEcoline SeriesEL-100RG Micro EL-150GB Micro EL-200RB Micro Please read this manual carefully prior to product operation! Bitte lesen Sie diese Bedienungsanleitung vor Inbetriebnahme des Produkts! 07/2013 Deutsch Manual: EL-100RG Micro / EL-150GB Micro / EL-200RB Micro Rechtlicher Hinweis: Die Firma Laserworld AG behält sich das Recht vor, Änderungen an ihren Produkten vorzunehmen, die der technischen Weiter entwicklung dienen. Diese Änderungen wer den nicht notwendigerweise in jedem Einzel fall dokumentiert. Diese Betriebsanleitung und die darin ent haltenen Informationen wurden mit der ge botenen Sorgfalt zusammengestellt. Die Fir ma Laserworld AG übernimmt jedoch keine Gewähr für Druckfehler, andere Fehler oder daraus entstehende Schäden. Die in dieser Bedienungsanleitung genann ten Marken und Produktnamen sind Waren zeichen oder eingetragene Warenzeichen der jeweiligen Titelhalter. Legal notice: Laserworld AG reserves the right to make modications to its products, attending to further technical developments. These modi cations do not necessarily have to be recor ded in each case. This manual and its information have been made with due care. Laserworld AG cannot, however, take any responsibility for errata, bugs, or the resulting damages. The brands and product names mentioned in this manual are trade marks or registered trade marks of their respective owners. Manual: EL-100RG Micro / EL-150GB Micro / EL-200RB Micro Content: Scope of delivery & details Preliminary warning notices Initial operations, safety instructions Working on the device Service notes Warnings and other notices on the device Device connections & setting opptions Operation Final statement Technical data sheet Laser specications Manual: EL-100RG Micro / EL-150GB Micro / EL-200RB Micro 1. Scope of delivery & details Please check if all listed parts are included and undamaged. Included in delivery: 1 x laser projector mounting material for ceiling mounting 3. Initial operations, safety instructions Make sure to use correct voltage ; see in formation on device & in this manual. Make sure that the device is not connec ted to mains during installation. Installation has to be done by technical experienced and qualied persons cording to safety regulations of the res pective country. Always ensure that maximum permissib le exposure (MPE) is not exceeded in are as accessible to the public. In some countries an additional ins pection by technical control institutes could be necessary. Connect an easily accessible inter lock connector or circuit breaker to the projector. The power supply should be easily acces sible. If the device has been exposed to great temperature changes , do not switch it on immediately. Condensation water may damage device. Never use dimmer, RC or other electroni cally switched sockets. Whenever possib le, do not use the laser projector together with large appliances (especially fog ma Ensure sucient ventilation place the device on any warm or heat ra diating surface. Especially the ventilati on openings must not be covered 2. Preliminary warning notices Please use this device only according to these operating instructions Do not use the device if there are any on housing, connector panels, power supplies or power cords. Never look directly into the light source of a laser projector. Danger of blindness! Do not operate the device at high humidity, in the rain or in dusty environments. Protect device against dripping or splashing water. Do not place any liquid lled containers at the device. Warranty claim expires with removal of warranty label. Manual: EL-100RG Micro / EL-150GB Micro / EL-200RB Micro Ensure that device does not get over heated. Make sure that the device is not exposed to spotlights (especially moving heads). Heat of spotlights could overheat laser in a little while and leads to a degra dation of performance. 4. Working on the device Be sure that the mains plug is not connected to the power sup ply while installing. Take o all reecting things like rings, watches etc. before starting to work with or at the projector. Only use non-reecting tools to work on device. Wear protective clothing (like goggles, gloves etc.) accor ding to laser power and wavelength of the laser. 5. Service notes Moisture and heat can reduce lifetime of the laser system dramatically and expires any warranty claim. Quick on/o switching of device can re duce durability of the laser diode drama tically. Avoid concussions during transport. To increase durability of your laser, protect device against overheating: Always ensure sucient ventilation. Do not face spotlights (especially mo ving heads) to the device. Check temperature after approx. 30 minutes with each new installation. If necessary install the projector at a place with dierent temperature. Keep the device dry. Protect ...

Distributed brands:

logo tarm
logo-pangolinlogo-coherentlogo-wireless-solutionsint visionsSpider-Laser-Game

logo-vplt-foerderndes-mitgliedilda logo black cleanedup 2006 member

Contact us:
ch +41-71-6778080
en +44-161-8188969


You agree to the disclaimer of this page with using it.