Downloads, Manuals

Download details

Laserworld Manual Ecoline Series EL-100RG IR 2014 Laserworld Manual Ecoline Series EL-100RG IR 2014

Size647.18 KB
MD5 Checksumaf29a546aef94d6b7c056c7a728dabdd

Text in this document

Laserworld Ads:
Find more products:
Manual / BedienungsanleitungEcoline SeriesEL-100RG Micro IR Please spend a few minutes to read this manual fully before operating this laser! Bitte lesen Sie diese Bedienungsanleitung sorgfältig vor Inbetriebnahme dieses Showlasersystems! Deutsch Manual: EL-100RG Micro IR Rechtlicher Hinweis: Die Firma Laserworld (Switzerland) AG behält sich das Recht vor, Änderungen an ihren Pro dukten vorzunehmen, die der technischen Weiterentwicklung dienen. Diese Änderun gen werden nicht notwendigerweise in je dem Einzelfall dokumentiert. Diese Betriebsanleitung und die darin enthal tenen Informationen wurden mit der gebote nen Sorgfalt zusammengestellt. Die Firma La serworld (Switzerland) AG übernimmt jedoch keine Gewähr für Druckfehler, andere Fehler oder daraus entstehende Schäden. Die in dieser Bedienungsanleitung genann ten Marken und Produktnamen sind Waren zeichen oder eingetragene Warenzeichen der jeweiligen Titelhalter. Legal notice: Thank you for purchasing this Laserworld product. Due to continual product develop ments and technical improvements, Laser world (Switzerland) AG reserves the right to make modications to its products. This manual and its content have been made with due care but Laserworld (Switzerland) AG cannot however, take any responsibility for any errors, omissions or any resulting damages forthwith. The brands and product names mentioned in this manual are trade marks or registered trade marks of their respective owners. Manual: EL-100RG Micro IR Content: Product and package contents Preliminary warning notices Initial operations, safety instructions Working on the device Service notes Warnings and other notices on the device Device connections & setting opptions Operation Final statement Technical data sheet Laser specications Manual: EL-100RG Micro IR 1. Product and package contents Please check if all listed parts are included and undamaged. Included in delivery: 1 x laser projector 1 x remote control unit 1 x small tripod 3. Initial operations, safety instructions Make sure to use correct voltage ; see in formation on device & in this manual. Make sure that the device is not connec ted to mains during installation. Installation has to be done by technical experienced and qualied persons cording to safety regulations of the res pective country. Always ensure that maximum permissib le exposure (MPE) is not exceeded in are as accessible to the public or members of sta. In some countries an additional ins pection by technical control institutes could be necessary. Connect an easily accessible inter lock connector or circuit breaker to the projector. The power supply should be easily acces sible. If the device has been exposed to great temperature changes , do not switch it on immediately. Condensation water (or any moisture/water formed) may dama ge device. Never use dimmer, RC or other electroni cally switched sockets. Whenever possib le, do not use the laser projector together with large appliances (especially fog ma 2. Preliminary warning notices Please use this device only according to these operating instructions Do not use the device if there are any on housing, connector panels, power supplies or power cords. Never look directly into the light source of a laser projector. Danger of damage to the eyes or even blindness in extreme circumstances! Do not operate the device at high humidity, in the rain or in dusty environments. Protect device against dripping or splashing water. Do not place any liquid lled containers near to this device. Any warranty claims are void if the warranty label is removed or tampered with in any way. Manual: EL-100RG Micro IR Ensure sucient ventilation place the device on any warm or heat ra diating surface. Especially the ventilati on openings must not be covered Ensure that device does not get over heated. Make sure that the device is not exposed to spotlights (especially moving heads). Heat of spotlights could overheat laser in a little while and leads to a degra dation of performance. 4. Working on the device Be sure that the mains plug is not connected to the power supply while installing. Take o all reecting things like rings, watches etc. before starting to work with or at the projector. Only use non-reecting tools to work on device. Wear protective clothing (like goggles, gloves etc.) ac cording to laser power and wavelength of the laser. 5. Service notes Moisture and heat can reduce lifetime of the laser system dramatically and expires any warranty claim. Quick on/o switching of device can re duce durability of the laser diode drama tically. Avoid sharp knocks and shocks to this device and ensure sucient protection during transportation. Look after your La serworld product. To increase durability of your laser, protect device against overheating: Always ensure sucient ventilation. Do not face spotlights (especially mo ving...

Distributed brands:

logo tarm
logo-pangolinlogo-coherentlogo-wireless-solutionsint visionsSpider-Laser-Game

logo-vplt-foerderndes-mitgliedilda logo black cleanedup 2006 member

Contact us:
ch +41-71-6778080
en +44-161-8188969


You agree to the disclaimer of this page with using it.