Downloads, Manuals

Download details

Laserworld Manual Laser Module SwissLas RB-1.5, RB-3.0, RB-3.8 2012 Laserworld Manual Laser Module SwissLas RB-1.5, RB-3.0, RB-3.8 2012

Size1.1 MB
MD5 Checksumc537ece7d858d5b2c576ab4c9d8a4c77

Text in this document

Laserworld Ads:
Find more products:
Manual / Bedienungsanleitung RB-1.5 / RB-3.0 / RB-3.8 Please read this manual carefully prior to product operation! Bitte lesen Sie diese Bedienungsanleitung vor Inbetriebnahme des Produkts! rev. 04/2012 vs English Manual: RB-1.5 / RB-3.0 / RB-3.8 Manual: RB-1.5 / RB-3.0/ RB-3.8 page 2 / 9 page 3 / 9 Rechtlicher Hinweis: Die Firma Laserworld AG behält sich das Recht vor, Änderungen an ihren Produkten vorzunehmen, die der technischen Weiter - entwicklung dienen. Diese Änderungen wer - den nicht notwendigerweise in jedem Einzel - fall dokumentiert. Diese Betriebsanleitung und die darin ent - haltenen Informationen wurden mit der ge - botenen Sorgfalt zusammengestellt. Die Fir - ma Laserworld AG übernimmt jedoch keine Gewähr für Druckfehler, andere Fehler oder daraus entstehende Schäden. Die in dieser Bedienungsanleitung genann - ten Marken und Produktnamen sind Waren - zeichen oder eingetragene Warenzeichen der jeweiligen Titelhalter. Legal notice: Laserworld AG reserves the right to make modications to its products, attending to further technical developments. These modi - cations do not necessarily have to be recor - ded in each case. This manual and its information have been made with due care. Laserworld AG cannot, however, take any responsibility for errata, bugs, or the resulting damages. The brands and product names mentioned in this manual are trade marks or registered trade marks of their respective owners. Content: Scope of delivery & details Preliminary warning notices Steps for setup, safety instructions Safety instructions for work on the device Service notes Aligning the module Final statement Technical data sheet Manual: RB-1.5 / RB-3.0 / RB-3.8 Manual: RB-1.5 / RB-3.0/ RB-3.8 page 4 / 9 page 5 / 9 1. Scope of delivery & details Please check if all listed parts are included and undamaged. Included in delivery: 1 x laser module 1 x manual 3. Initial operations, safety instructions 1. Make sure to use correct voltage ; see in - formation on device & in this manual. 2. Make sure that the device is not connec - ted to mains during installation. 3. Installation has to be done by technical experienced and qualied persons ac - cording to safety regulations of the res - pective country. 4. If the device has been exposed to great temperature changes , do not switch it on immediately. Condensation water may damage device. 5. Never use dimmer, RC or other electroni - cally switched sockets. Whenever possib - le, do not use the module together with large appliances (especially fog machi - nes) on the same mains! 6. Ensure that device does not get over - heated. The module must be mounted to a solid ground plate. Additional hea - tsinks are necessary in most cases. It is the responsibility of the customer to use heatsinks and/or ventilation in proper di - mension. 4. Working on the device 1. Take o all reecting things like rings, watches etc. before star - ting to work with or at the module. 2. Only use non-reecting tools to work on device. 3. Wear protective clothing (like goggles, gloves etc.) ac - cording to laser power and wavelength of the laser. 2. Preliminary warning notices 1. Please use this device only according to these operating instructions . 2. Do not use the device if there are any visible damages on module, connectors or boards. 3. Never look directly into the light source of a laser source. Danger of blindness! 4. Do not operate the device at high humidity, in the rain or in dusty environments. 5. Protect device against dripping or splashing water. Warranty claim expires with removal or break of warranty label. 5. Service notes Moisture and heat can reduce lifetime of the laser module dramatically and ex - pires any warranty claim. Quick on/o switching of device can re - duce durability of the laser diode drama - tically. Avoid concussions during transport. To increase durability of your laser, protect device against overheating: - Always ensure sucient ventilation. - Check temperature after approx. 30 minutes with each new installation. If necessary install the projector at a place with dierent temperature. - Keep the device dry. Protect it from moisture, rain and damp. - Switch o device when it is not nee - ded. Diodes are switched on and can wear o even if there is no visible la - ser output. As for troubleshooting, please check the FAQ on our website Removal of the warranty label as well as damages to the device caused by improper handling, neglect of the sa - fety instructions and service notes will void the warranty. 6. Important notice: The module must be used with appropriate heatsinks. The heat transmission works through the ground plate, so the cooling must be handed directly there. The module is not suitable...

Distributed brands:

logo tarm
logo-pangolinlogo-coherentlogo-wireless-solutionsint visionsSpider-Laser-Game

logo-vplt-foerderndes-mitgliedilda logo black cleanedup 2006 member

Contact us:
ch +41-71-6778080
en +44-161-8720272


You agree to the disclaimer of this page with using it.