Downloads, Manuals

Download details

Laserworld Manual Water Screen Set 2012 Laserworld Manual Water Screen Set 2012

Size791.97 KB
MD5 Checksum559de88092977535970cebc1d2546083

Text in this document

Laserworld Ads:
Find more products:
Manual / Bedienungsanleitung Water Screen Set Please read this manual carefully prior to product operation! Bitte lesen Sie diese Bedienungsanleitung vor Inbetriebnahme des Produkts! Deutsch Manual: Laserworld Water Screen Set Rechtlicher Hinweis: Die Firma Laserworld AG behält sich das Recht vor, Änderungen an ihren Produkten vorzunehmen, die der technischen Weiter entwicklung dienen. Diese Änderungen wer den nicht notwendigerweise in jedem Einzel fall dokumentiert. Diese Betriebsanleitung und die darin ent haltenen Informationen wurden mit der ge botenen Sorgfalt zusammengestellt. Die Fir ma Laserworld AG übernimmt jedoch keine Gewähr für Druckfehler, andere Fehler oder daraus entstehende Schäden. Die in dieser Bedienungsanleitung genann ten Marken und Produktnamen sind Waren zeichen oder eingetragene Warenzeichen der jeweiligen Titelhalter. Legal notice: Laserworld AG reserves the right to make modications to its products, attending to further technical developments. These modi cations do not necessarily have to be recor ded in each case. This manual and its information have been made with due care. Laserworld AG cannot, however, take any responsibility for errata, bugs, or the resulting damages. The brands and product names mentioned in this manual are trade marks or registered trade marks of their respective owners. Manual: Laserworld Water Screen Set Content: Scope of delivery & details Preliminary warning notices Initial operations, safety instructions Working on the device Service notes Assembly of the water bassin set Fastening of the water screen element Connecting the water screen element, the hose and the water pump Final steps Final statement Technical data sheet water pump Manual: Laserworld Water Screen Set 1. Scope of delivery & details Please check if all listed parts are included and undamaged. Included in delivery: 1 x screen element (2 meter) 2 x mounting clamps 1 x water pump 1 x water hose (10 meter) 2 x water basins (2 elements) 1 x connecting tube (for the water basins) 1 x connection element 3. Initial operations, safety instructions Make sure to use correct voltage ; see in formation at the end of this manual. Make sure that the water pump is connected to mains during installation. Installation has to be done by technical experienced and qualied persons cording to safety regulations of the res pective country. If the water screen is used in combination with laser projectors, always ensure that maximum permissible exposure (MPE) is not exceeded in areas accessible to the public. The power supply should be easily acces sible. Please follow the accident prevention regulations of professional associations and/or comparable regulations for acci dent prevention. Never use dimmer, RC or other electroni cally switched sockets. Whenever possib le, do not use the water pump together with large appliances on the same mains! Ensure that the water pump does not get overheated. Don‘t run the water pump without water. Make sure that the aspiration hole of the water pump is permanently covered with water (at least 5 cm). It is not allowed to stay or to walk below the assembled screen element. Make sure that the hose is well xed. 2. Preliminary warning notices Please use this set only according to these operating instructions Do not use the water screen set if there are any Do not run the water pump without water. Warranty claim expires with removal of warranty label. Manual: Laserworld Water Screen Set 4. Working on the set The mains plug of the water pump must not to be connected to the power supply while installing the water screen. It is not allowed to x conducting lines or plug connec tions in, at or next to the water bassin or screen element. Protective clothing (hard hat etc.) has to be worn. Never open the housing of the water pump. 5. Service notes Quick on/o switching of the water pump can reduce its durability. Keep the brass nozzles clean. Run the water screen set with water only and take measures to avoid calcications. The lter system of water pump has to be controlled and cleaned in regular in tervalls. The water hose, the bassin and the con necting elements have to be checked if there are any leaks. The water basin has to be put on a leveled surface. If the basin is completely lled with wa ter, it can reach the weight of up to 400kg. Make sure that oor structure is designed to handle that weight. The water screen set has to be protected from direct sunlight, extreme temperatu res, extreme weather conditions. If the water pump is lying in horizontal position in the bassin, the oat gauge has to be removed of the pump. Open the clamp and remove the oat gauge. Close the clamp again! If the water pump is in an upright position there is no need to remove the oat gauge. Removal of the warranty label as well as damages to the device caused...

Distributed brands:

logo tarm
logo-pangolinlogo-coherentlogo-wireless-solutionsint visionsSpider-Laser-Game

logo-vplt-foerderndes-mitgliedilda logo black cleanedup 2006 member

Contact us:
ch +41-71-6778080
en +44-161-8188969


You agree to the disclaimer of this page with using it.