Downloads, Manuals

Download details

Laserworld Manual Phoenix Micro Net Slim 2013 Laserworld Manual Phoenix Micro Net Slim 2013

Size679.01 KB
MD5 Checksume24161ed2031237daf89b10e7e0a282b

Text in this document

Laserworld Ads:
Find more products:
Manual / Bedienungsanleitung MicroNet Slim Network Interface Please read this manual carefully prior to product operation! Bitte lesen Sie diese Bedienungsanleitung vor Inbetriebnahme des Produkts! Deutsch Manual: MicroNet Slim - Network Interface Rechtlicher Hinweis: Die Firma Laserworld (Switzerland) AG behält sich das Recht vor, Änderungen an ihren Pro dukten vorzunehmen, die der technischen Weiterentwicklung dienen. Diese Änderun gen werden nicht notwendigerweise in je dem Einzelfall dokumentiert. Diese Betriebsanleitung und die darin ent haltenen Informationen wurden mit der ge botenen Sorgfalt zusammengestellt. Die Fir ma Laserworld AG übernimmt jedoch keine Gewähr für Druckfehler, andere Fehler oder daraus entstehende Schäden. Die in dieser Bedienungsanleitung genann ten Marken und Produktnamen sind Waren zeichen oder eingetragene Warenzeichen der jeweiligen Titelhalter. Legal notice: Laserworld (Switzerland) AG reserves the right to make modications to its products, attending to further technical developments. These modications do not necessarily have to be recorded in each case. This manual and its information have been made with due care. Laserworld AG cannot, however, take any responsibility for errata, bugs, or the resulting damages. The brands and product names mentioned in this manual are trade marks or registered trade marks of their respective owners. Manual: MicroNet Slim - Network Interface Content: Scope of delivery & details Preliminary warning notices Initial operations, safety instructions Device connections Operation Power Supply Final statement Manual: MicroNet Slim - Network Interface 1. Scope of delivery & details Please check if all listed parts are included and undamaged. Included in delivery: 1 x Network interface 1 x power cable 1 x micro-SD card 3. Initial operations, safety instructions Make sure to use correct voltage ; see in formation in this manual. Installation has to be done by technical experienced and qualied persons cording to safety regulations of the res pective country. If the network interface has been expo sed to great temperature changes not switch it on immediately. Conden sation water may damage the network interface. Never use dimmer, RC or other electroni cally switched sockets. Whenever possi ble, do not use the network interface to gether with large appliances (especially fog machines) on the same mains! Ensure sucient ventilation place the network interface on any warm or heat radiating surface. 2. Preliminary warning notices Please use the network interface only according to these instructions Do not use the network interface if there are any Do not operate the network interface at high humidity, in rain or in dusty environments. Protect the network interface against dripping or splashing water. Manual: MicroNet Slim - Network Interface 4. Device Connections power connection USB port for power supply description) Slot for micro-SD card the delivery) ILDA out addressing LAN connection DMX in DMX out Manual: MicroNet Slim - Network Interface Function overview: - X/Y scanner output with 12 bit resolution (4096 dierent positions on each axis) - Up to 6 color output with 8 bit resolution (256 dierent values per color channels): red, green, blue, intensity, user dened 1, user dened 2 - DMX512 input and output (non-isolated) - 10/100 Mbit Ethernet port - Flexible IP address setting: xed address, DHCP, or AutoIP - Micro-SD card slot for ILDA le playback (ILDA format code 5 RGB) - Build-in laser frames for standalone operation - Standalone operation via audio control (with external microphone), DMX control, or auto trigger - maximum scan speed of up to 150kpps - Up to 16 devices can be used in parallel for multi-projector laser showsThe DIP switches can be used to select the desired operating mode. The mode should be set before switching on the device. Changing the mode while the device is active can lead to un dened and dangerous laser output. In the stand-alone modes (audio controlled, DMX controlled, demo mode), the ILDA interface displays pre-dened laser frame patterns. If there is no Micro-SD card present, the internal patterns are used. Alternatively, a Micro-SD card with the preset ILDA les can be inserted. The ILDA les have to use format code 5 (ILDA RGB le format). The le name has to consist of a 3-digit number, followed by the extension .ild Maximum number of les is 256. Counting starts from 000.ild, followed by 001.ild, 002.ild... 255.ild ILDA les are played at a speed of 50 frames per second. Due to the huge mass of available Micro-SD cards on the market, it cannot be guaranteed that all cards are compatible with the ILDA interface. The usage of small =2GB SD cards instead of high capacity SDHC or XDHC cards is recommended. 5.1 Sound-to-light Mode Dip switch setting switch On (1) / O (0) 5. Opera...

Distributed brands:

logo tarm
logo-pangolinlogo-coherentlogo-wireless-solutionsint visionsSpider-Laser-Game

logo-vplt-foerderndes-mitgliedilda logo black cleanedup 2006 member

Contact us:
ch +41-71-6778080
en +44-161-8720272


You agree to the disclaimer of this page with using it.