Downloads, Manuals

Download details

Laserworld Manual Revolution Series RS-800G US, RS-800RGY US, RS-1000RGB US, RS-2300RGB US 2011 Laserworld Manual Revolution Series RS-800G US, RS-800RGY US, RS-1000RGB US, RS-2300RGB US 2011

Size1.1 MB
MD5 Checksum2b70850238c939d21d4990a32daaa3db

Text in this document

Laserworld Ads:
Find more products:
RS 800 G US , RS 800 RGY US RS 1000 RGB US , RS 2300 RGB US RS 2300 RGB US Manual Read carefully before using this device! Manual: RS 800 G US, RS 800 RGY US, RS 1000 RGB US, RS 2300 RGB US RS - 2700 RGB US 2 / 9 Revision Jun - 13 Checking parts Please check if all listed parts are included, and are not damaged. Included: 1 x Laser projector 1 x Power ca ble 1 x 9 - pin plug 2 x key 1 x safety cord 1 x manual Safety instructions If the device has been exposed to great temperature changes, do not switch it on immediately. Condensation water may damage your device. Leave the device switched off until it has r eached room temperature. The laser must only be used for shows. Any operation has to be attended and supervised by a skilled and well - trained operator. Never leave this device running unattended and keep it away from children and unauthorized persons. Ke ep away from heaters and other heat sources. In order to safeguard sufficient ventilation, leave 50 cm of free space around the device. Never direct the laser beam to people or animals. CAUTION LASER DIODE: If you open the device for cleaning, always disco nnect from mains! HEALTH HAZARD! Never look directly into the light source, as sensitive persons may suffer an epileptic shock! These lasers are considered a definite eye hazard, particularly at the higher power levels, which WILL cause eye damage. So thes e laser series models supplied with a key switch to prevent unauthorized use, warning labels and aperture labels affixed to the laser. Installation safety Prior to installation and operation of the laser, the paths of the beams and effects should be consi dered, particularly with respect to how they will reach the audience. If direct audience scanning is desired, then the laser energy in the effects needs to be considered to decide if the effects are safe for direct viewing. Always ensure, that the maximum permissible exposure (MPE) is not exceeded in the area accessible to the public. So install the laser in such a way, that minimum distances and heights ensure the MPE is never exceeded in the public area. When audience scanning is performed, a n operator ha s to be present. An easily accessible emergency switch has to be installed. When setting up the laser, make sure the laser is affixed firmly, to avoid vibrations. Warning labels on the device Laser radiation Read manual before use Avoid exposure Operatio n by qualified To the beam personal only Laser class 4 Never direct laser Beam at people Caution of radiation Never look directly If cover is removed into beam Indoor use only At front opening: Avoid exposure �넀 laser radiation is emitted . OPERATING T HE LASER �✀�刀�儀�똀�圀�̀�唀�䠀�倀�刀�夀�䠀�̀�圀�䬀�䠀�̀�娀�䐀�唀�唀�䐀�儀�圀�尀�ሀ�嘀�䠀�唀�䰀�䐀�伀�̀�儀�堀�倀�䔀�䠀�唀�̀�伀�䐀�䔀�䠀�伀�̀ - removal voids warranty The operator has to make sure that laser radiation �넀 for laser class 4 also reflected laser radiation �넀 higher than the maximum permissible level is avoided by technical or org anisational measures. (Especially with respect to the MPE, see above.) Make sure to use the correct voltage. Use a power socket with earth/ground. �✀�刀�儀�똀�圀�̀�堀�嘀�䠀�̀�䜀�䰀�倀�倀�䠀�唀�ༀ�̀ RC, or other electronically switched �嘀�刀�䘀�一�䠀�圀�嘀�ᄀ�̀�㨀�䬀�䠀�儀�䠀�夀�䠀�唀�̀�匀�刀�嘀�嘀�䰀�䔀�伀�䠀�ༀ�̀�䜀�刀�儀�똀�圀�̀�堀�嘀�䠀�̀�圀�䬀�䠀�̀�伀�䐀�嘀�䠀�唀�̀�圀�刀�䨀�䠀�圀�䬀 er with large appliances, especially fog machines, on the same mains! If the device is used in a flying installation, the mounting brackets and an appropriate safety - rope must be afixed. 2 7 00 mW Manual: RS 800 G US, RS 800 RGY US, RS 1000 RGB US, RS 2300 RGB US RS - 2700 RGB US 3 / 9 Revision Jun - 13 In some countries, the operator must notify the accidence insurance a nd the authority for industrial safety, before...

Distributed brands:

logo tarm
logo-pangolinlogo-coherentlogo-wireless-solutionsint visionsSpider-Laser-Game

logo-vplt-foerderndes-mitgliedilda logo black cleanedup 2006 member

Contact us:
ch +41-71-6778080
en +44-161-8720272


You agree to the disclaimer of this page with using it.