Downloads

Downloads

Downloads, Manuals

Download details

Laserworld Manual Moving Head Pro-800G MH, Pro-1200G MH, Pro-2000G MH 2011 Laserworld Manual Moving Head Pro-800G MH, Pro-1200G MH, Pro-2000G MH 2011

e-max.it: your social media marketing partner
Information
Version2011
Size2.36 MB
MD5 Checksumed6f836bcff5c04c6d9e59f05156b6c4
Mirrors:

Text in this document

Laserworld Ads:
Find more products:
Pro - 8 0 0G MH , Pro - 1200G MH, Pro - 2000G MH Manual Bedienungsanleitung Please read this manual carefully before use ! Bitte lesen Sie diese Bedienungsanleitung, bevor Sie das Gert in Betrieb nehmen! (Seite 12) M ANUAL: Laserworld Moving Head PRO - 80 0 /1200/2000 G MH Rev : June 13 Page /Seite 2 of 19 Checking Parts Please check if the follo wing parts are included: 1 x Laser projector 1 x Power cable 1 x User manual Safety instructions If the device has been exposed to great temperature changes, do not switch it on immediately. Condensation water may damage your device. Leave the device swit ched off until it has reached room temperature. The laser must only be used for shows. Any operation has to be attended and supervised by a skilled and well - trained operator. Never leave this device running unattended and keep it away from children and u nauthorized persons. Keep away from heaters and other heat sources. In order to safeguard sufficient ventilation, leave 50 cm of free space around the device. Never direct the laser beam to people or animals. CAUTION LASER DIODE: If you open the device for cleaning, always disconnect from mains! - HEALTH HAZARD! Never look directly into the light source, as sensitive persons may suffer an epileptic shock! These lasers are considered a definite eye hazard, particularly at the higher power levels, which WILL cause eye damage. So these laser series models supplied with a key switch to prevent unauthorized use, warning labels and aperture labels affixed to the laser. Installation safety Prior to installation and operation of the laser, the paths of the beams and effects should be considered, particularly with respect to how they will reach the audience. If direct audience scanning is desired, then the laser energy in the effects needs to be considered to decide if the effects are safe for direct viewing. Always e nsure, that the maximum permissible exposure (MPE) is not exceeded in the area accesible to the public. So install the laser in such a way, that minimum distances and heights ensure the MPE is never exceeded in the public area. Warning labels on the device Laser radiation Read manual before use Avoid exposure Operation by qualified To the beam personal only Laser class 4 Never direct laser Beam at people Caution of radiation Never look directly If cover is removed into beam Indoor use only At front opening: Avoid exposure �넀 laser radiation is emmited. M ANUAL: Laserworld Moving Head PRO - 80 0 /1200/2000 G MH Rev : June 13 Page /Seite 3 of 19 OPERATING THE LASER The operator has to make sure that laser radiation �넀 also reflected laser radiation �넀 higher than the maximum permissible level is avoided by technical or organisational measures. ( Especially with respect to the MPE, see above.) Make sure to use the correct voltage If the device is used in a flying installation, the mounting brackets and an appropriate safety - rope must be fixed. In some countries, the operator must notify the acciden ce insurance and the authority for industrial safety, before operating a laser. For more information, contact the relevant authorities. Please consider that unauthorized modifications on the device are strictly forbidden due to safety reasons! If this devi ce will be operated in any way differently than described in this manual, the product may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short - circuit, burns, electric shock, etc. Keep surrounding d ry and clean. T his unit should be keep dry, do not use in the rain or damp and dusty environment. Projector should be put in a water - proof housing when operated outside. �㔀�䠀�䨀�堀�伀�䐀�唀�伀�尀�̀�刀�匀�䠀�儀�̀�圀�䬀�䠀�̀�䜀�䠀�夀�䰀�䘀�䠀�̀�଀�嘀�䠀�䠀�̀�대�䘀�伀�䠀�䐀�儀�䰀�儀�䨀�됀�̀�䤀�堀�唀�圀�䬀�䠀�唀�̀�䜀�刀�娀�儀�ఀ�̀�圀�刀�̀�䘀�䬀�䠀�䘀�一�̀�䤀�刀�唀�̀�䜀�堀�嘀�圀�̀�䰀�儀�嘀�䰀�䜀�䠀�ༀ�̀�刀�唀�̀ if fog fluid condenses in the housing (if so rearrange hazer and/or laser position). Operating temperature is 10~35 C . In a new installation, check af...


Distributed brands:

logo-laserworldlogo-swisslasHB-Laserlogo-ray-technologies-rti
logo tarm
logo-pangolinlogo-coherentlogo-wireless-solutionsint visionsSpider-Laser-Game

logo-vplt-foerderndes-mitgliedilda logo black cleanedup 2006 member


Contact us:
ch +41-71-6778080
en +44-161-8188969

 

You agree to the disclaimer of this page with using it.