Downloads, Manuals

Download details

Laserworld Manual Moving Head Pro-700RGB MH, PL-1500RGB MH, PL-2800RGB MH 2011 Laserworld Manual Moving Head Pro-700RGB MH, PL-1500RGB MH, PL-2800RGB MH 2011

Size2.42 MB
MD5 Checksumc14a5525eb7c00e5c44972f28b70c8ab

Text in this document

Laserworld Ads:
Find more products:
P ro 700RGB MH PL 15 00RGB MH, PL 28 00RGB MH Manual Bedienungsanleitung Please read this manual carefully before use ! Bitte lesen Sie diese Bedienungsanleitung, bevor Sie das Gert in Betrieb nehmen! (Seite 12) M ANUAL: Laserworld P ro - 7 0 0 RGB MH, PL - 1500/2800RGB MH Rev : Apr - 10 Page /Seite 2 of 18 Checking Par ts Please check if the following parts are included: 1 x Laser projector 1 x Power cable 1 x User manual Safety instructions If the device has been exposed to great temperature changes, do not switch it on immediately. Condensation water may damage your device. Leave the device switched off until it has reached room temperature. The laser must only be used for shows. Any operation has to be attended and supervised by a skilled and well - trained operator. Never leave this device running unattended and kee p it away from children and unauthorized persons. Keep away from heaters and other heat sources. In order to safeguard sufficient ventilation, leave 50 cm of free space around the device. Never direct the laser beam to people or animals. CAUTION LASER DIOD E: If you open the device for cleaning, always disconnect from mains! - HEALTH HAZARD! Never look directly into the light source, as sensitive persons may suffer an epileptic shock! These lasers are considered a definite eye hazard, particularly at the hig her power levels, which WILL cause eye damage. So these laser series models supplied with a key switch to prevent unauthorized use, warning labels and aperture labels affixed to the laser. Installation safety Prior to installation and operation of the lase r, the paths of the beams and effects should be considered, particularly with respect to how they will reach the audience. If direct audience scanning is desired, then the laser energy in the effects needs to be considered to decide if the effects are safe for direct viewing. Always ensure, that the maximum permissible exposure (MPE) is not exceeded in the area accesible to the public. So install the laser in such a way, that minimum distances and heights ensure the MPE is never exceeded in the public area. Warning labels on the device Laser radiation Read manual before use Avoid exposure Operation by qualified To the beam personal only Laser class 4 Never direct laser Beam at people Caution of radiation Never look directly If cover is removed into bea m Indoor use only At front opening: Avoid exposure �넀 laser radiation is emmited. M ANUAL: Laserworld P ro - 7 0 0 RGB MH, PL - 1500/2800RGB MH Rev : Apr - 10 Page /Seite 3 of 18 OPERATING THE LASER The operator has to make sure that laser radiation �넀 also reflected laser radiation �넀 higher than the maximum permissible level is avoided by technical or organisational measures. (Especially with respect to the MPE, see above.) Make sure to use the correct voltage If the device is used in a flying installation, the mounting brackets and an appropriate safety - rope must be fixed. In some countries, the ope rator must notify the accidence insurance and the authority for industrial safety, before operating a laser. For more information, contact the relevant authorities. Please consider that unauthorized modifications on the device are strictly forbidden due to safety reasons! If this device will be operated in any way differently than described in this manual, the product may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short - circuit, burns, electric s hock, etc. Keep surrounding dry and clean. T his unit should be keep dry, do not use in the rain or damp and dusty environment. Projector should be put in a water - proof housing when operated outside. �㔀�䠀�䨀�堀�伀�䐀�唀�伀�尀�̀�刀�匀�䠀�儀�̀�圀�䬀�䠀�̀�䜀�䠀�夀�䰀�䘀�䠀�̀�଀�嘀�䠀�䠀�̀�대�䘀�伀�䠀�䐀�儀�䰀�儀�䨀�됀�̀�䤀�堀�唀�圀�䬀�䠀�唀�̀�䜀�刀�娀�儀�ఀ�̀ to check for dust inside, or if fog fluid condenses in the housing (if so rearrange hazer and/or laser position). Operating temperature is 10~35 C . In a new installation, check after some 15 - 30 minutes whether the outlet air gets too warm. Regularly check the inside for dust deposits, especially around the fans. Let laser cool off 10minutes after 2 hours of operation,to ensure maximum li...

Distributed brands:

logo tarm
logo-pangolinlogo-coherentlogo-wireless-solutionsint visionsSpider-Laser-Game

logo-vplt-foerderndes-mitgliedilda logo black cleanedup 2006 member

Contact us:
ch +41-71-6778080
en +44-161-8188969


You agree to the disclaimer of this page with using it.