Downloads, Manuals

Download details

Laserworld Manual Purelight Series PL-8000G, PL-12000G, PL-20000G, PL-1900RGB, PL-3400RGB, PL-4700RGB, PL-6200RGB, PL-8900RGB, PL-11400RGB 2011 Laserworld Manual Purelight Series PL-8000G, PL-12000G, PL-20000G, PL-1900RGB, PL-3400RGB, PL-4700RGB, PL-6200RGB, PL-8900RGB, PL-11400RGB 2011

Size1.86 MB
MD5 Checksuma5b8bf2a9d944e4fbaddc1d732545a31

Text in this document

Laserworld Ads:
Find more products:
Laserworld Purelight Series Purelight advanced models: PL - 8000 G, PL - 12000 G, PL - 20000 G PL - 1900 RGB, PL - 3400 RGB, PL - 4700 RGB, PL - 6200 RGB, PL - 8900 RGB, PL - 11400 RGB Manual Read carefully before using this device! Page 2 � �㈀�✀�⠀�̀�✀�똀�⠀� �㌀�⼀�㈀�Ⰰ Lire correc �圀�䠀�倀�䠀�儀�圀�̀�伀�䠀�̀�倀�刀�䜀�䠀�̀�䜀�똀�䠀�倀�匀�伀�刀�䰀�̀�䐀�夀�䐀�儀�圀�̀�堀�圀�䰀�伀�䰀�嘀�䐀�圀�䰀�刀�儀�̀�Ѐ Page 6 Bedienungsanleitung Bitte lesen Sie diese Bedienungsanleitung, bevor Sie das Gert in Betrieb nehmen! Seite 9 Appendix technical diagram , p. 14 Manual 2 / 14 Revision: Jun - 13 Checking parts Please check if all listed parts are includ ed, and are not damaged. Included: 1 x Laser projector 1 x Power cable 1 x 9 - pin plug 2 x key 1 x safety cord 1 x manual Safety instructions If the device has been exposed to great temperature changes, do not switch it on immediately. Condensation water ma y damage your device. Leave the device switched off until it has reached room temperature. The laser must only be used for shows. Any operation has to be attended and supervised by a skilled and well - trained operator. Never leave this device running unat tended and keep it away from children and unauthorized persons. Keep away from heaters and other heat sources. In order to safeguard sufficient ventilation, leave 50 cm of free space around the device. Never direct the laser beam to people or animals. CAUT ION LASER DIODE: If you open the device for cleaning, always disconnect from mains! HEALTH HAZARD! Never look directly into the light source, as sensitive persons may suffer an epileptic shock! These lasers are considered a definite eye hazard, particularl y at the higher power levels, which WILL cause eye damage. So these laser series models supplied with a key switch to prevent unauthorized use, warning labels and aperture labels affixed to the laser. Installation safety Prior to installation and operation of the laser, the paths of the beams and effects should be considered, particularly with respect to how they will reach the audience. If direct audience scanning is desired, then the laser energy in the effects needs to be considered to decide if the effe cts are safe for direct viewing. Always ensure, that the maximum permissible exposure (MPE) is not exceeded in the area accesible to the public. So install the laser in such a way, that minimum distances and heights ensure the MPE is never exceeded in the public area. When setting up the laser, make sure the laser is affixed firmly, to avoid vibrations. Warning labels on the device Laser radiation Read manual before use Avoid exposure Operation by qualified To the beam personal only Laser class 4 Never d irect laser Beam at people Caution of radiation Never look directly If cover is removed into beam Indoor use only At front opening: Avoid exposure �넀 laser radiation is emmited. OPERATING THE LASER �✀�刀�儀�똀�圀�̀�唀�䠀�倀�刀�夀�䠀�̀�圀�䬀�䠀�̀�娀�䐀�唀�唀�䐀�儀�圀�尀�ሀ�嘀�䠀�唀�䰀�䐀�伀�̀�儀�堀�倀�䔀�䠀�唀�̀�伀�䐀�䔀�䠀�伀�̀ - remov al voids warranty The operator has to make sure that laser radiation �넀 for laser class 4 also reflected laser radiation �넀 higher than the maximum permissible level is avoided by technical or organisational measures. (Especially with respect to the MPE, see above.) Make sure to use the correct voltage. Use a power socket with earth/ground. �✀�刀�儀�똀�圀�̀�堀�嘀�䠀�̀�䜀�䰀�倀�倀�䠀�唀�ༀ�̀�㔀�☀�ༀ or other electronically switched �嘀�刀�䘀�一�䠀�圀�嘀�ᄀ�̀�㨀�䬀�䠀�儀�䠀�夀�䠀�唀�̀�匀�刀�嘀�嘀�䰀�䔀�伀�䠀�ༀ�̀�...

Distributed brands:

logo tarm
logo-pangolinlogo-coherentlogo-wireless-solutionsint visionsSpider-Laser-Game

logo-vplt-foerderndes-mitgliedilda logo black cleanedup 2006 member

Contact us:
ch +41-71-6778080
en +44-161-8188969


You agree to the disclaimer of this page with using it.