Downloads, Manuals

Download details

SwissLas Manual PS-29.000RGB CT, PL-20.000RGB CT, PL-42.000RGB CT, PL-20.000G CT 2012 SwissLas Manual PS-29.000RGB CT, PL-20.000RGB CT, PL-42.000RGB CT, PL-20.000G CT 2012

Size646.36 KB
MD5 Checksumac478da904b29f3fcc510a3e676b2ce1

Text in this document

Laserworld Ads:
Find more products:
Manual PS-29.000RGB CT PL-20.000RGB CT, PL-42.000RGB CT, PL-20.000G CT Please read this manual carefully prior to product operation! rev. 10/2012 ns Manual: Pure Sapphire / Purelight high power Legal notice: Laserworld AG reserves the right to make modications to its products, attending to further technical developments. These modications do not necessarily have to be recorded in each case. This manual and its information have been made with due care. Laserworld AG cannot, howe ver, take any responsibility for errata, bugs, or the resulting damages. The brands and product names mentioned in this manual are trade marks or registered trade marks of their respective owners. Content: Scope of delivery & details Preliminary warning notices Steps for setup, safety instructions Safety instructions for work on the device Service notes Warnings and other notices on the device Device connections Operation Final statement Technical data sheet Laser specications Manual: Pure Sapphire / Purelight high power 1. Scope of delivery & details Please check if all listed parts are included and undamaged. Included in delivery: 1 x laser projector 1 x power cable 3. Initial operations, safety instructions Make sure to use correct voltage ; see in formation on device & in this manual. Make sure that the device is not connec ted to mains during installation. Installation has to be done by technical experienced and qualied persons cording to safety regulations of the res pective country. Always ensure that maximum permissib le exposure (MPE) is not exceeded in are as accessible to the public. In some countries an additional ins pection by technical control institutes could be necessary. Connect an easily accessible inter lock connector or circuit breaker to the projector. The power supply should be easily acces sible. When installing the laser mount it with a minimum distance of 15 cm from walls and objects. For safe setup e.g. on walls or ceilings safety cord. The safety cord should be able to withstand tenfold the weight of the device. Please follow the accident prevention regulations of pro fessional associations and/or comparable regulations for accident prevention. If the device has been exposed to great temperature changes , do not switch it on immediately. Condensation water may damage device. 2. Preliminary warning notices Please use this device only according to these operating instructions Do not use the device if there are any on housing, connector panels, power supplies or power cords. Never look directly into the light source of a laser projector. Danger of blindness! Do not operate the device at a high humidity, in rain or in dusty environments. Protect device against dripping or splashing water. Do not place any liquid lled containers at the device. Warranty claim expires with removal of warranty label. Manual: Pure Sapphire / Purelight high power Never use dimmer, RC or other electroni cally switched sockets. Whenever possib le, do not use the laser projector together with large appliances (especially fog ma Ensure sucient ventilation place the device on any warm or heat ra diating surface. Especially the ventilati on openings must not be covered Ensure that device does not get over heated. Make sure that the device is not exposed to spotlights (especially moving heads). Heat of spotlights could overheat laser in a little while and leads to a degra dation of performance. 4. Working on the device Be sure that the mains plug is not connected to the power sup ply while installing or opening the device (e.g. for cleaning). Take o all reecting things like rings, watches etc. before starting to work with or at the projector. Only use non-reecting tools to work on device. Wear protective clothing (like goggles, gloves etc.) accor ding to laser power and wavelength of the laser. 5. Service notes Moisture and heat can reduce lifetime of the laser system dramatically and expires any warranty claim. Quick on/o switching of device can re duce durability of the laser diode drama tically. Avoid concussions during transport. To increase durability of your laser, protect device against overheating: Always ensure sucient ventilation. Do not face spotlights (especially mo ving heads) to the device. Check temperature after approx. 30 minutes with each new installation. If necessary install the projector at a place with dierent temperature. Keep the device dry. Protect it from moisture, rain and damp. Switch o device when it is not nee ded. Diodes are switched on and can wear o even if there is no visible la ser output. Open the device at regular intervals and remove any dust, particularly around fans and laser. Otherwise the risk of overhe ating is imminent and will void the war ranty. If there are traces of fog uid in the pr...

Distributed brands:

logo tarm
logo-pangolinlogo-coherentlogo-wireless-solutionsint visionsSpider-Laser-Game

logo-vplt-foerderndes-mitgliedilda logo black cleanedup 2006 member

Contact us:
ch +41-71-6778080
en +44-161-8188969


You agree to the disclaimer of this page with using it.