Search FAQ & Page

Laser Harp Controller FAQ

What do I need to set in Phoenix software to get the Laser Harp properly connected?

If your USB to Midi interface is properly connected and the drivers are installed, you may still not be able to use the Laser Harp properly on Phoenix.

1. Switch to "Laser Harp Mode" in Phoenix (Setting>Mode>Harp)

2. Do the proper device setting: Go to Settings>Midi/DMX; Check "Use MIDI Input" and Select the Midi Device in the dropdown menu (It may be shown as "sound device"). If you don't see any Midi/Sound device as selectable option, your USB to Midi interface is not properly installed.

3. Set the right channels to be able to use the Harp: Effect Start Address must be 48!!

Distributed brands:

Distributed Brand LaserworldDistributed Brand tarmdistributed brand Ray Technologies
Distributed Brand Laserworld ShoweditorDistributed Brand Garden StarDistributed Brand PangolinDistributed Brand coherentDistributed Brand wireless solutionsDistributed Brand Spider Laser Game

ilda logo black cleanedup 2006 member

Contact us:
ch +41-71-6778080
en +44-161-8720272

You agree to the disclaimer of this page with using it.