RTI PIKO RGB 30 OPSL

Rti Piko Rgb Fl S
The powerful but compact RTI PIKO RGB 30 OPSL is suitable for indoor and outdoor laser show applications at concerts, festivals, and other huge events with easy operation due to the built-in software and DMX control. The PIKO is equipped with the latest RSL Semiconductor modules (RSL) and a green Coherent Taipan OPSL making it an amazing laser for beam shows and demanding graphic projections such as laser mapping or projections over long distances. The high-end performance is part of the PIKO's DNA and makes this possible due to the great performance combination of the semiconductor RSL & Coherent Taipan OPSL modules.
Incl. waterproof flightcase
  • 30 W guaranteed power
  • Advanced RTI Semiconductor laser modules (RSL) produce a perfect shaped beam profile for red & blue.
  • Coherent Taipan OPSL green
  • Maintenance free laser system
  • RSL & Coherent Taipan OPSL modules with no color misalignment
  • New advanced sealed optical section with no color misalignment
  • Complex graphics capable - 45 [email protected]° ILDA scanners – upgradable to 60kpps
  • DMX controlled double grating (burst and line)
  • Full-color mixing
  • Extremely sharp intense beams - low divergence
  • Multi-control mainboard for DMX, ArtNET, LAN, ILDA, ILDA streaming and stand-alone operation
  • Digital display for easy mode selection
  • Integrated network switch for linking the control signal
  • FB4-QS MAX optional integration
  • Rugged tour-grade compact housing
  • Laser Artists' choice
  • Lighting Designers' choice
  • Incl. waterproof flightcase

ShowNET mainboard as standard:
  • Various control options: ILDA, Professional DMX and ArtNET (two modes), LAN (computer control, integrated DAC), Stand-Alone Operation, ILDA Streaming Receiver, Master-Slave
  • Create custom content, store it inside the laser and play it back in different modes
  • Free laser show control software included
Rti Piko Rgb Fl S
Rti Piko Rgb F S
Rti Piko Rgb Fr S
RTI PIKO RGB B S
Stand-Alone modeSTAND-ALONE MODE:
The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.
DMX modeDMX MODE:
The laser can be controlled with a standard DMX controller or DMX software.
ArtNET modeArtNET Control mode
Master-Slave modeMASTER-SLAVE MODE:
One laser sends control commands, the other laser follows these. Works with Stand-Alone modes and Sound-to-Light modes.
LAN connectionLAN MODE:
The laser can be controlled over LAN - this can be either direct software control, or ArtNET or similar (depending on the main board)
ILDA connectionILDA MODE:
The laser can be controlled over standard ILDA, the analog control signal for laser control. External Digital-Analog-Converters (DACs) can be used.
ILDA StreamingILDA Streaming
ShowNET insideSHOWNET INSIDE:
The laser is equipped with the advanced ShowNET laser mainboard which brings a multitude of features to the laser and makes it an intelligent lighting device.
Free Showeditor laser software includedSHOWEDITOR INCLUDED:
The full version of the laser show control software Showeditor is included in delivery.
READ MORE PRODUCT DETAILS
Built with the latest RTI Semiconductor Laser Module technology and a green Coherent Taipan OPSL module!

The RTI PIKO RGB 30 OPSL is made in Germany and is a compact show laser system in a rugged, dust-proof housing that is ideally suited for top professional laser show applications of any kind. It is built with the latest RTI semiconductor laser modules that are specially designed in a way to keep spot size as well as divergence equal on both x- and y-axis. This is significantly advantageous over solutions with a very good divergence on one axis, but a bad divergence on the other. The laser modules inside the RTI PIKO RGB 30 OPSL are different - the spot size and shape is equal for all colors and on both axis!

The beam specifications of the new RTI PIKO RGB 30 OPSL are given with only ca. 4.5 mm diameter and <0.9 mrad divergence - which applies to both axis, so it’s an actual value not an average and provides higher quality results than specifications with mixed calculations. The extremely small beam diameter allows for the use of very small mirrors, which results in reduced inertia and thus very good scanning performance.

KEY FEATURES

  • 30 W total RGB power in a small housing of only 250 x 411 x 265 mm
  • super small spot of ca. 4.5 mm for reduced inertia and thus fast scanning
  • extremely low divergence of less than <0.9 mrad - on both axis!
  • Integrated network switch for linking the control signal
  • Maintenance free, no misalignment: new generation of laser color combination
  • Compact form factor, module size equal to the Coherent OPSL modules
  • extremely lightweight unit with only 20 kg
  • Different, brighter wavelengths for increased visibility
  • brilliant colors and great color fading
  • Laser modules do not come out of internal alignment
  • Maintenance free laser modules
  • Interlock / e-stop signal can be daisy-chained
  • High quality product, made in Germany
  • Great scanning performance suitable for projections as well as for beams
  • Including integrated switchable Double Grating effect!

The RTI PIKO RGB 30 OPSL impresses with a guaranteed RGB output power of 30'000 mW. Great visibility is achieved with the new RTI Semiconductor Laser Modules (RSL) with special wavelengths for increased visibility: 8'000 mW / 637 nm for a very bright red combined with a strong blue laser module with 15'000 mW / 455 nm. The 10'000 mW / 530 nm Coherent Taipan OPSL green provides a warmer green tone than the 520 nm diodes and has increased visibility.
These new RSL modules with their extremely low divergence and homogenous beam shape make the RTI PIKO RGB 30 OPSL a top professional laser system. The extremely small beam diameter of only ca. 4.5 mm allows for the use of small scanner mirrors which leads to reduced inertia and higher scan speeds. This is especially important, as the RTI PIKO RGB 30 OPSL can be used for any kind of laser show application: Super sharp beams and vivid colors for large scale concerts and festivals but also a perfectly matched beam for crisp graphics.

Beam Spot Comparison RTI PIKO RGB 30 OPSL

The RTI Semiconductor Laser Modules are maintenance free and do not come out of internal alignment.
The standard scanners can be run at a maximum of 45 [email protected]° ILDA and a maximum scan angle of 50°. CT-6210H scanners with LAS Turboscan drivers are available as option and provide even higher scan speeds with up to 60kpps at ILDA 8°.

The housing is built very durable and ideal for use on the road. It has an interlock / e-stop through port, which allows for daisy-chaining the interlock signal, which means that only one e-stop is required for several laser systems. Due to the dustproof housing, the maintenance effort is very low and the device is also suitable for tough touring applications.

The powerful RTI PIKO RGB 30 OPSL is suitable for indoor and outdoor show laser applications at concerts, festivals and other huge events. Demanding graphics projections or projections over long distances are possible without any problems, due to the extremely good divergence.

INCLUDING SHOWNET LASER MAINBOARD

The RTI PIKO RGB 30 OPSL is delivered with a ShowNET laser mainboard as standard. This means it has a multitude of control features already built-in: Control via DMX or ArtNET, just like a normal lighting fixture, are possible as well as computer control via ILDA or LAN. Of course the laser can be run in stand alone operation, too. The contents for playback (for DMX, ArtNet, Stand-Alone, etc.) can be fully customized. As the ShowNET laser mainboard comes with a full license of the Showeditor software, it is easy to create custom content for the built-in memory or even directly control the laser with a computer - either live or for creation an playback of complete laser shows.

If ILDA shall be used as control option, like from an external Lasergraph DSP, the internal ShowNET mainboard can also be used as receiver for an ILDA streaming signal - so the externbal ILDA signal can be feeded to an external ShowNET device and this sends the direct control to the RTI PIKO RGB 30 OPSL via ILDA Streaming - so no long ILDA cables are required any more, even with ILDA based control systems.
SEE DETAIL PICTURES
RTI Piko Series 001 Beam
RTI Piko Series 002 Beam
RTI Piko Series 006 Beam
RTI Piko Series 004 Beam
RTI Piko Series 008 Beam
RTI Piko Series 009 Beam
RTI Piko Series 007 Beam
RTI Piko Series 003 Beam
RTI Piko Series 005 Beam
TECHNICAL DETAILS
Guaranteed Power at aperture
30'000 mW
Power Red
8'000 mW / 637 nm
Power Green
10'000 mW / 530 nm
Power Blue
15'000 mW / 455 nm
Beam Specifications (full angle)
ca. 4.5 mm / <0.9 mrad
Scanner
45 [email protected]° ILDA; optional CT-6210H with LAS Turboscan: 60 [email protected]° ILDA, max. 60°
Max. Scan Angle
50°
Laser Source
RSL modules, Coherent Taipan OPSL
Laser Class
4
Operation Modes
ILDA, LAN (Software), DMX, ArtNET, ILDA-Streaming, Stand-Alone; (integrated intelligent ShowNET laser mainboard with display)
Basic Patterns
over 120 (layers, tunnels, fences, waves, etc.)
Accessories
Incl. waterproof flightcase, interlock connector, key, power cable, manual,; full version Showeditor software license included
Power Supply
85-250 V AC 50/60 Hz
Power Consumption
600 W
Dimensions
250 x 411 x 265 mm
Weight
20 kg
EAN / MPN
7640144999346
*Due to Advanced Optical Correction technology used in our laser systems the optical power of each colour within installed laser module(s) may slightly differ from the specification of respective laser module(s).
 

Distributed brands:

Distributed Brand LaserworldDistributed Brand tarmdistributed brand Ray Technologies
Distributed Brand Laserworld ShoweditorDistributed Brand ShowcontrollerDistributed Brand PangolinDistributed Brand coherent