RTI PIKO RGB 28

Rti Piko Rgb Fl S
The powerful but compact RTI PIKO RGB 28 is suitable for indoor and outdoor laser show applications at concerts, festivals, and other huge events with easy operation due to the built-in software and DMX control. The PIKO is equipped with the latest RSL Semiconductor modules (RSL) making it an amazing laser for beam shows and demanding graphic projections such as laser mapping or projections over long distances. The high-end performance is part of the PIKO's DNA and makes this possible due to the perfectly matched beam profiles across all colors and great divergence on both the x and y axis.
Incl. waterproof flightcase
  • 28 W guaranteed power
  • Advanced RTI Semiconductor laser modules (RSL) produce a perfect shaped beam profile across all colors
  • Equal divergence on x and y axis
  • Maintenance free laser system
  • RSL Modules with no color misalignment
  • New advanced sealed optical section with no color misalignment
  • Complex graphics capable - 45kpps ILDA 8° scanners – upgradable to 60kpps
  • Full-color mixing
  • Extremely sharp intense beams - low divergence
  • Multi-control mainboard for DMX, ArtNET, LAN, ILDA, ILDA streaming and stand-alone operation
  • Digital display for easy mode selection
  • Integrated network switch for linking the control signal
  • FB4-QS MAX optional integration
  • Rugged tour-grade compact housing
  • Laser Artists' choice
  • Lighting Designers' choice
  • Incl. waterproof flightcase

ShowNET mainboard as standard:
  • Various control options: ILDA, Professional DMX and ArtNET (two modes), LAN (computer control, integrated DAC), Stand-Alone Operation, ILDA Streaming Receiver, Master-Slave
  • Create custom content, store it inside the laser and play it back in different modes
  • Free laser show control software included
Rti Piko Rgb Fl S
Rti Piko Rgb F S
Rti Piko Rgb Fr S
RTI PIKO RGB B S
Stand-Alone modeSTAND-ALONE MODE:
The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.
DMX modeDMX MODE:
The laser can be controlled with a standard DMX controller or DMX software.
ArtNET modeArtNET Control mode
Master-Slave modeMASTER-SLAVE MODE:
One laser sends control commands, the other laser follows these. Works with Stand-Alone modes and Sound-to-Light modes.
LAN connectionLAN MODE:
The laser can be controlled over LAN - this can be either direct software control, or ArtNET or similar (depending on the main board)
ILDA connectionILDA MODE:
The laser can be controlled over standard ILDA, the analog control signal for laser control. External Digital-Analog-Converters (DACs) can be used.
ILDA StreamingILDA Streaming
ShowNET insideSHOWNET INSIDE:
The laser is equipped with the advanced ShowNET laser mainboard which brings a multitude of features to the laser and makes it an intelligent lighting device.
Free Showeditor laser software includedSHOWEDITOR INCLUDED:
The full version of the laser show control software Showeditor is included in delivery.
READ MORE PRODUCT DETAILS
The RTI PIKO RGB 28 impresses with a guaranteed RGB output power of 28'000 mW. Great visibility is achieved with the new RTI Semiconductor Laser Modules (RSL) with special wavelengths for increased visibility: 8'000 mW / 637 nm for a very bright red combined with 9'000 mW / 525 nm green and a strong blue laser module with 15'000 mW / 455 nm. The 525nm green provides a warmer green tone than the 520nm diodes and has increased visibility. These new RSL modules with their extremely low divergence and homogenous beam shape make the RTI PIKO RGB 28 a top professional laser system. The extremely small beam diameter of only ca. 4.5 mm allows for the use of small scanner mirrors which leads to reduced inertia and higher scan speeds. This is especially important, as the RTI PIKO RGB 28 can be used for any kind of laser show application: Super sharp beams and vivid colors for large scale concerts and festivals but also a perfectly matched beam for crisp graphics.

  • Maintenance free, no misalignment: new generation of laser color combination
  • Integrated network switch for linking the control signal


Beam Spot Comparison RTI PIKO RGB 28

The RTI Semiconductor Laser Modules are maintenance free and do not come out of internal alignment. The standard scanners can be run at a maximum of 45kpps ILDA 8°; optional CT-6210H with LAS Turboscan: 60kpps ILDA 8°; max. 60° (@35 kpps) and a maximum scan angle of max. 50°. CT-6210H scanners with LAS Turboscan drivers are available as option and provide even higher scan speeds with up to 60kpps at ILDA 8°. The housing is built very durable and ideal for use on the road. It has an interlock / e-stop through port, which allows for daisy-chaining the interlock signal, which means that only one e-stop is required for several laser systems. Due to the dustproof housing, the maintenance effort is very low and the device is also suitable for tough touring applications. The powerful RTI PIKO RGB 28 is suitable for indoor and outdoor show laser applications at concerts, festivals and other huge events. Demanding graphics projections or projections over long distances are possible without any problems, due to the extremely good divergence.
SEE DETAIL PICTURES
RTI PIKO RGB Graphics 001 Beam
RTI PIKO RGB Graphics 002 Beam
RTI Piko Series 004 Beam
RTI Piko Series 002 Beam
RTI Piko Series 007 Beam
RTI Piko Series 009 Beam
RTI Piko Series 001 Beam
RTI Piko Series 006 Beam
RTI Piko Series 008 Beam
RTI Piko Series 005 Beam
RTI Piko Series 003 Beam
TECHNICAL DETAILS
Guaranteed Power at aperture
28'000 mW
Power Red
8'000 mW / 637 nm
Power Green
9'000 mW / 525 nm
Power Blue
15'000 mW / 455 nm
Beam Specifications (full angle)
ca. 4.5 mm / < 0.9 mrad
Scanner
45kpps ILDA 8°; optional CT-6210H with LAS Turboscan: 60kpps ILDA 8°; max. 60° (@35 kpps)
Max. Scan Angle
max. 50°
Laser Source
RTI Semiconductor Laser Modules
Laser Class
4
Operation Modes
ILDA, LAN (Software), DMX, ArtNET, ILDA-Streaming, Stand-Alone
Basic Patterns
100, customizable
Accessories
Incl. waterproof flightcase, interlock connector, key, power cable, manual,; full version Showeditor software license included
Power Supply
85-250 V AC 50/60 Hz
Power Consumption
500 W
Dimensions
250 x 411 x 265 mm
Weight
20 kg
EAN / MPN
7640144999339
 

Distributed brands:

Distributed Brand LaserworldDistributed Brand tarmdistributed brand Ray Technologies
Distributed Brand Laserworld ShoweditorDistributed Brand ShowcontrollerDistributed Brand PangolinDistributed Brand coherent