Laserworld PL-5500RGB CT Outdoor

Laserworld PL 5500RGB Outdoor   Front
Powerful outdoor RGB whitelight laser for architectural illumination, mappings or logo projections with integrated ShowNET network interface and fast CT scanners.
Full feature laser show software license included!
  • 5'500 mW guaranteed power
  • Graphics capable - CT-6210H 60kpps @ 8° ILDA
  • Max scan angle 60°
  • Full colour mixing - analog modulation
  • Sharp intense beams – ca. 5.0 mm beam diameter and low divergence of 1.0 mrad
  • Save safety settings direct to the laser through Admin Tool
  • Free computer control software – Showeditor - upgradable to Showcontroller

ShowNET mainboard as standard:
  • Various control options: ILDA, Professional DMX and ArtNET (two modes), LAN (computer control, integrated DAC), Stand-Alone Operation, ILDA Streaming Receiver, Master-Slave
  • Create custom content, store it inside the laser and play it back in different modes
  • Free laser show control software included
Laserworld PL 5500RGB Outdoor   Front
Laserworld PL 5500RGB Outdoor   Front Right
Laserworld PL 5500RGB Outdoor   Front Left
Stand-Alone modeSTAND-ALONE MODE:
The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.
ArtNET modeArtNET Control mode
LAN connectionLAN MODE:
The laser can be controlled over LAN - this can be either direct software control, or ArtNET or similar (depending on the main board)
ILDA StreamingILDA Streaming
The laser is equipped with the advanced ShowNET laser mainboard which brings a multitude of features to the laser and makes it an intelligent lighting device.
Free Showeditor laser software includedSHOWEDITOR INCLUDED:
The full version of the laser show control software Showeditor is included in delivery.
The Laserworld PL-5500RGB CT Outdoor is especially designed for the use as projection laser in an ourdoor environment for fixed installations. It is equipped with reliable diode laser technology and very fast CT-6210H 60kpps @ 8° ILDA for clear logo and pattern projections.
The housing of the Laserworld PL-5500RGB CT Outdoor is rain proof and makes this laser well suitable for architecture projections, laser mappings or logo displays.
The Laserworld PL-5500RGB CT Outdoor comes with integrated ShowNET network interface and free laser show software. Details in the box below.

The show laser light system is completely equipped with diode laser sources and has a good white balance, with linear color fading behaviour and high visibility.

Advantages of the Laserworld PL-5500RGB CT Outdoor are:

  • great for logo projections or use for architectural illumination
  • can be used as stand-alone device or with direct control
  • very fast scanners
  • brilliant colors with great linear color fading behavior
  • easy to operate, ShowNET and free software included
  • including Safety Unit

The Laserworld PL-5500RGB CT Outdoor has a beam diameter of about ca. 5.0 mm and beam divergence of ca. 1.0 mrad.
Guaranteed output power at aperture is 5'500 mW. 1'100 mW / 638 nm (red), 1'600 mW / 520 nm (green), 3'000 mW / 450 nm (blue).
Very fast scanners work at a speed of CT-6210H 60kpps @ 8° ILDA and can do a max. scan angle of 60°.

The complete projector is built rain proof and is cooled through the external cooling fins (bottom part). Thus the maintenance effort is kept very low. A Safety Unit is included in delivery.

Operating temperature: -5°C to +40°C

+ Integrated ShowNET incl. free laser show software

The Laserworld PL-5500RGB CT Outdoor features an integrated ShowNET network interface with free laser control software included!
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new Laserworld PL-5500RGB CT Outdoor for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through LAN. It is possible to trigger single frames via ArtNet. You can play custom frames and shows from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different DMX modes:
(1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
(2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show.
The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.

Guaranteed Power at aperture
5'500 mW
Power Red
1'100 mW / 638 nm
Power Green
1'600 mW / 520 nm
Power Blue
3'000 mW / 450 nm
Beam Specifications
ca. 5.0 mm / 1.0 mrad
CT-6210H 60kpps @ 8° ILDA
Max. Scan Angle
Laser Source
Laser Class
Operation Modes
LAN, ArtNet, integrated SD card, stand-alone, ILDA streaming
Basic Patterns
over 120 (layers, tunnels, fences, waves, etc.)
Wall-mount, Safety Unit, manual; full version Showeditor software license included
Power Supply
85-250 V AC 50/60 Hz
Power Consumption
100 W
550 x 200 x 180 mm (L x W x H)
9.1 kg
*Due to Advanced Optical Correction technology used in our laser systems the optical power of each colour within installed laser module(s) may slightly differ from the specification of respective laser module(s).

Distributed brands:

Distributed Brand LaserworldDistributed Brand tarmdistributed brand Ray Technologies
Distributed Brand Laserworld ShoweditorDistributed Brand ShowcontrollerDistributed Brand PangolinDistributed Brand coherent