Laserworld CS-2000RGB FX

Laserworld CS 2000RGB FX Fl
A high-power semi-professional laser capable of powerful standard laser effects like beams, waves and tunnels but also basic graphics all of which can combine with the 3 built in grating effects to become a real room filler. This laser has easy plug and play sound-to-light and stand-alone modes, DMX control, so it can be controlled with the rest of your lighting, but also has an ILDA port for computer control. Perfect for large nightclub installs, indoor events and mobile DJs
  • 2 W RGB laser system
  • 3 additional grating effects: Line, Burst and Radial
  • DMX controllable, master-slave operation possible
  • Computer controllable via ILDA
  • Plug & play: Sound-to-light and stand-alone modes
  • Capable of basic graphics - 30 [email protected]° scanners
  • Full color with analog modulation
  • Front panel laser beam masking plate
Laserworld CS 2000RGB 0015 Beam
Laserworld CS 2000RGB 0017 Beam
Laserworld CS 2000RGB 0010 Beam
Laserworld CS 2000RGB 0005 Beam
Laserworld CS 2000RGB 0011 Beam
Laserworld CS 2000RGB 0012 Beam
Laserworld CS 2000RGB 0020 Beam
Laserworld CS 2000RGB 0019 Beam
Laserworld CS 2000RGB 0009 Beam
Laserworld CS 2000RGB 0004 Beam
Laserworld CS 2000RGB 0014 Beam
Laserworld CS 2000RGB 0003 Beam
Laserworld CS 2000RGB 0001 Beam
Laserworld CS 2000RGB 0013 Beam
Laserworld CS 2000RGB 0018 Beam
Sound-to-light modeSOUND-TO-LIGHT MODE:
Let the beat of the music control the laser automatically
Stand-Alone modeSTAND-ALONE MODE:
The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.
DMX modeDMX MODE:
The laser can be controlled with a standard DMX controller or DMX software.
Master-Slave modeMASTER-SLAVE MODE:
One laser sends control commands, the other laser follows these. Works with Stand-Alone modes and Sound-to-Light modes.
ILDA connectionILDA MODE:
The laser can be controlled over standard ILDA, the analog control signal for laser control. External Digital-Analog-Converters (DACs) can be used.
Laserworld CS 2000RGB FX Fl
Laserworld CS 2000RGB FX Fr
Laserworld CS 2000RGB FX F
Laserworld CS 2000RGB FX B
READ MORE PRODUCT DETAILS
The Laserworld CS-2000RGB FX has three grating effects built in in addition to the graphics capable scanners: line grating, burst grating and radial grating.
Together with the ca. 200 (layers, tunnels, fences, waves, etc.) stored on the laser, these effects offer a variety of combinations for impressive illumination of small to medium-sized locations. The grating effects make the projected patterns appear as if they were displayed by many projectors at the same time. The resulting extensiveness allows for effects that could not be achieved in any other way.
But that's not everything the Laserworld CS-2000RGB FX has to offer:

The Laserworld CS-2000RGB FX is an analog modulated, full color RGB laser system a total output power of up to 2'000 mW and a guaranteed output power of 1'600 mW. The red laser source has an output power of 250 mW / 635 nm, the green of 250 mW / 532 nm and the royal-blue laser source has an output power of 1'100 mW / 445 nm. The laser sources ensure powerful laser beams. The projector has good beam specifications with a beam diameter of about ca. 3 mm and beam divergence of 2 mrad. The galvo system has a scan speed of up to 30 [email protected]°.

Pattern size and the sensitivity of the microphone can be set by two rotary buttons on the rear side of the housing. 

Through DMX, in the stand-alone mode as well as in the sound-to-light mode about ca. 200 (layers, tunnels, fences, waves, etc.) can be projected in different colors and in various speed. If the stand-alone mode is active, the pre-programmed patterns run without assistance and in the sound-to-light mode, the laser system projects according to the sound.

Next to the modes mentioned above, this laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX cable to a main projector (master projector) project the same patterns like the master projector.

The Laserworld CS-2000RGB FX is computer controllable through a professional ILDA interface. Thus own or pre-programmed lasershows, logos, texts or own graphics and animations can be shown in combination with a laser control software (e.g. Showeditor or Showcontroller).

There are safety features like a key switch, an interlock and an on-off switch.

The Laserworld CS-2000RGB FX show laser projector comes with a compact housing, which is light weight and has a stable bracket. The bracket allows for different mounting positions: a hanging as well as a standing installation is possible - ideal for mobile DJs and temporary laser shows, but also for fixed installations at a truss or at the ceiling.

The Laserworld CS-2000RGB FX is ideal for semi-professional applications and is perfectly suitable in bars, medium sized clubs and discos as well as for mobile DJs, private use and in any other party location.

SEE DETAIL PICTURES
Laserworld CS 2000RGB 0015 Beam
Laserworld CS 2000RGB 0017 Beam
Laserworld CS 2000RGB 0010 Beam
Laserworld CS 2000RGB 0005 Beam
Laserworld CS 2000RGB 0011 Beam
Laserworld CS 2000RGB 0012 Beam
Laserworld CS 2000RGB 0020 Beam
Laserworld CS 2000RGB 0019 Beam
Laserworld CS 2000RGB 0009 Beam
Laserworld CS 2000RGB 0004 Beam
Laserworld CS 2000RGB 0014 Beam
Laserworld CS 2000RGB 0003 Beam
Laserworld CS 2000RGB 0001 Beam
Laserworld CS 2000RGB 0013 Beam
Laserworld CS 2000RGB 0018 Beam
Laserworld CS 2000RGB 0002 Beam
Laserworld CS 2000RGB 0008 Beam
Laserworld CS 2000RGB 0006 Beam
Laserworld CS 2000RGB 0016 Beam
Laserworld CS 2000RGB 0007 Beam
TECHNICAL DETAILS
Total Power
2'000 mW
Guaranteed Power
1'600 mW
Power Red
250 mW / 635 nm
Power Green
250 mW / 532 nm
Power Blue
1'100 mW / 445 nm
Beam Specifications
ca. 3 mm / 2 mrad
Scanner
30 [email protected]°; galvo system
Max. Scan Angle
40°
Laser Source
Diode, DPSS Laser
Laser Class
4
Operation Modes
stand-alone, sound-to-light, DMX, ILDA, master-slave
Basic Patterns
ca. 200 (layers, tunnels, fences, waves, etc.)
Accessories
power cable, manual, interlock, key
Power Supply
85V - 250 V AC
Power Consumption
120 W
Dimensions
190 x 274 x 160 mm
Weight
4.75 kg
EAN / MPN
7640144997410
 

Distributed brands:

Distributed Brand LaserworldDistributed Brand tarmdistributed brand Ray Technologies
Distributed Brand Laserworld ShoweditorDistributed Brand ShowcontrollerDistributed Brand PangolinDistributed Brand coherent