Downloads

Downloads

Downloads, Bedienungsanleitungen

Download details

Laserworld Manual ShowNET 2015/11 Laserworld Manual ShowNET 2015/11

e-max.it: your social media marketing partner
Information
Version2015-11
Dateigröße735.92 KB
MD5 Prüfsumme37fc9d2a8c6597e561f8656d963bdb72
Mirrors:

Text in this document

Laserworld Ads:
Mehr Produkte:
Manual / Bedienungsanleitung Laserworld ShowNET Network Interface Please read this manual carefully prior to product operation! Bitte lesen Sie diese Bedienungsanleitung vor Inbetriebnahme des Produkts! Deutsch Manual: MicroNet Slim - Network Interface Manual: MicroNet Slim - Network Interface Rechtlicher Hinweis: Die Firma Laserworld (Switzerland) AG behält sich das Recht vor, Änderungen an ihren Pro dukten vorzunehmen, die der technischen Weiterentwicklung dienen. Diese Änderun gen werden nicht notwendigerweise in je dem Einzelfall dokumentiert. Diese Betriebsanleitung und die darin ent haltenen Informationen wurden mit der ge botenen Sorgfalt zusammengestellt. Die Fir ma Laserworld AG übernimmt jedoch keine Gewähr für Druckfehler, andere Fehler oder daraus entstehende Schäden. Die in dieser Bedienungsanleitung genann ten Marken und Produktnamen sind Waren zeichen oder eingetragene Warenzeichen der jeweiligen Titelhalter. Legal notice: Laserworld (Switzerland) AG reserves the right to make modications to its products, attending to further technical developments. These modications do not necessarily have to be recorded in each case. This manual and its information have been made with due care. Laserworld AG cannot, however, take any responsibility for errata, bugs, or the resulting damages. The brands and product names mentioned in this manual are trade marks or registered trade marks of their respective owners. Manual: MicroNet Slim - Network Interface Content: Scope of delivery & details Preliminary warning notices Initial operations, safety instructions Device connections Operation Power Supply Final statement Manual: MicroNet Slim - Network Interface 1. Scope of delivery & details Please check if all listed parts are included and undamaged. Included in delivery: 1 x Network Interface 1 x Power Supply Unit 1 x Manual 1 x micro-SD Card 3. Initial operations, safety instructions Make sure to use correct voltage ; see in formation in this manual. Installation has to be done by technical experienced and qualied persons cording to safety regulations of the res pective country. If the network interface has been expo sed to great temperature changes not switch it on immediately. Conden sation water may damage the network interface. Never use dimmer, RC or other electroni cally switched sockets. Whenever possi ble, do not use the network interface to gether with large appliances (especially fog machines) on the same mains! Ensure sucient ventilation place the network interface on any warm or heat radiating surface. 2. Preliminary warning notices Please use the network interface only according to these instructions Do not use the network interface if there are any Do not operate the network interface at high humidity, in rain or in dusty environments. Protect the network interface against dripping or splashing water. Manual: MicroNet Slim - Network Interface 4. Device Connections Power in (PSU 12V) ILDA out LAN connection Address Settings SD-Card ILDA in Manual: MicroNet Slim - Network Interface Technical overview: - X/Y scanner output with 12 bit resolution (4096 dierent positions on each axis) - Up to 6 color output with 8 bit resolution (256 dierent values per color channels): red, green, blue, intensity, user dened 1, user dened 2 - DMX512 input and output (non-isolated) - 10/100 Mbit Ethernet port - Flexible IP address setting: xed address, DHCP or AutoIP - Micro-SD card slot for ILDA le playback (ILDA format code 5 RGB) - Built-in laser gures for stand alone operation - Stand alone operation via DMX control or auto trigger - maximum scan speed of up to 150kpps - Up to 16 devices can be used in parallel for multi-projector laser showsThe DIP switches can be used to select the desired operating mode. A change in the operation mode requires a restart of the device (unplug and replug the power supply). Do not change and DIP switch settings during operation, random and dangerous laser output can occur. In the stand-alone modes (DMX controlled, demo mode), the ILDA interface displays pre- dened laser gures. The internal patterns are used as standard. Inserting a Micro-SD card with ILDA les to the card slot allows for play back of these les. 5. Operation 5.1 DMX Mode Dip switch setting switch Binary DMX channel oset has to be on (1) for DMX mode To get laser output, DMX channel 1 needs to have a value greater than 0 (recommended 64 to 192), and DMX channel 2 also needs to have a value greater than 0. range function Laser intensity from o to full brightness (only if lasers support analog modulation) Laser full brightness Strobe with increasing speed select the laser frame pattern Manual: MicroNet Slim - Network Interface Size of the laser projection X axis Automatic size change of X axis with increasing speed Size of the laser projection Y axis Automatic size change of Y axis w...


Vertriebsmarken:

logo-laserworldlogo-swisslasHB-Laserlogo-ray-technologies-rti
logo tarmlogo-pangolinlogo-coherentlogo-wireless-solutionsint visionsSpider-Laser-Game

logo-vplt-foerderndes-mitglied ilda logo black cleanedup 2006 member

  
Kontakt:
+41-71-6778080
 
Sie stimmen der Datenschutzerklärung zu wenn Sie diese Seite nutzen